Problem
What problem is fixed by XORGServer 7.2.0Dc, the X.org X Window System Version 11 Relase 7.2.0 (ver 7.2.0Dc)?
Solution
XORGServer 7.2.0Dc contains an updated Matrox video driver (ver. 1.4.11) providing fixes for several Matrox video cards including the Matrox G200WB graphics card. (fz535268)
This supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer Release 6.0.0 with Maintenance Pack 4with or withoutX.org X Window System Version 11 Release 7.2.0 (ver 7.2.0Db)
----------------------------------------------------------I. Software Notes and Recommendations1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative.
----------------------------------------------------------II. Installation InstructionsTo install XORGServer 7.2.0Dc, follow these steps:
1. Login as root on a non-graphical virtual terminal.
2. Create an empty directory, such as /tmp/XORGServer-7.2.0Dc, to which the supplement will be downloaded.
3. Download XORGServer-7-2.0Dc-VOLS.tar fromhttps://ftp.scoexpert.com/openserver6/600/other/XorgServer.7.2.0Dcto the directory created in step 2.
4. After the download is complete, change to the directory containing the XORGServer-7.2.0Dc-VOLS.tar file, and run the following to extract the media image files:
# tar xvf XORGServer-7.2.0Dc-VOLS.tar5. Stop the X server if it is running, using a command such as:
# scologin stop6. Run the Software Manager with the command:
# scoadmin software7. Pull down the "Software" menu and select "Install New".
8. When prompted for the host from which to install, choose the local machine and then "Continue".
9. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".
10. When prompted for the "Image Directory", enter
the name of the directory created in step 2 and
choose "OK".11. When prompted to select software to install, make sure that
the entry for "X.org X Window System Version 11 Release
7.2.0 (ver 7.2.0Dc)" is highlighted. Choose "Install".12. Under "Upgrading Components Warning", select "Leave
replaced components on hard disk (loaded only)." Doing
so will allow you to revert to the previous version if
you remove this supplement later. If you skip this step,
then removing the supplement later will leave you without
a working X Server. If necessary, this can be remedied by
reinstalling the X.org Server component from Maintenance
Pack 4.13. Choose "Continue."14. Installation of XORGServer 7.2.0Dc will now proceed. Once it's completed, select "OK."
15. To exit the Software Manager, select "Exit" from the "Host" menu.
16. Once the installation has completed, you can remove or archive the downloaded tar file, the media image files, and the containing directory created in step 2.
17. If your system has Matrox G200WB graphics card, then
move the X server configuration file /etc/xorg.conf
aside before restarting X, to allow X to generate
a new version of the file.18. Restart X either by rebooting your system or running
# scologin start19. If your system has a Matrox G200WB graphics card, then if restarting X doesn't succeed, look at xorg.conf to make sure that Driver is set to "mga" and not "vesa."
----------------------------------------------------------III. Removal InstructionsNote: These instructions will remove XORGServer 7.2.0Dc. They will also restore the previously installed version of XORGServer provided you selected "Leave replaced components on hard disk (loaded only)" in step 12 of the Installation Instructions above.
1. Log in as root.2. Stop the X server if it is running, using a command such as:
# scologin stop3. Execute the command:# scoadmin software4. Highlight the entry for "X.org X Window System Version 11 Release 7.2.0 (ver 7.2.0Dc)" and make sure nothing else is highlighted.
5. Pull down the "Software" menu and select "Remove Software".
6. In the windows labeled "Confirm Selected Software," make sure that "X.org X Window System Version 11 Release 7.2.0 (7.2.0Dc)" is shown and select "Remove."
7. Removal of XORGServer 7.2.0Dc will now proceed. Once it's completed, select "OK."
Note: The rest of this procedure assumes that you kept
the prior X Server version loaded as described above in
Step 12 of the Installation Instructions. If you did not
do this then you will need to reinstall the X.org X Window
System Version 11 Release 7.2.0 from OpenServer 6.0.0
Maintenance Pack 4.8. Pull down the "Software" menu and select "Install New".
9. When prompted for the host from which to install, choose the local machine and then "Continue".
10. In the "Select Media" menu, pull down the "Media Device" menu. Select "Loaded Software", then choose "Continue".
11. When prompted to select software to install:
If reverting back to version 7.2.0Da in Maintenance Pack 4:
i. Move the cursor down to "SCO OpenServer Release 6.0.0 Maintenance Pack 4 (ver 1.0.0Ce)" and hit <ENTER> to show loaded components from Maintenance Pack 4.
ii. Move the cursor down to "X.org X Window System Version
11 Release 7.2.0" and hit <ENTER> to show loaded
packages from this component.iii. Move the cursor down to "X.org X11R7.2.0 Server (ver
7.2.0Da)" and hit <ENTER> to show loaded subpackages
of this package.iv. Move the cursor down to "X.org X11R7.2.0 Server" and hit <ENTER> to highlight it.
v. Make sure no other entries are highlighted.
If reverting back to the "X.org X Window System Version 11 Release 7.2.0 (ver 7.2.0Db)":
i. Move the cursor down to "X.org X Window System Version 11 Release 7.2.0 (ver 7.2.0Db)" and hit <ENTER> to highlight it.
ii. Make sure no other entries are highlighted.
12. Choose "Install."13. Installation of X.org X11R7.2.0 Server will now proceed. Once it's completed, select "OK."
14. To exit the Software Manager, select "Exit" from the "Host" menu.
15. If your system has Matrox G200WB graphics card, then
restore your old /etc/xorg.conf file (if you saved
it previously) or move the current version aside
before restarting X, to allow X to generate a new
version of the file.16. Restart X either by rebooting your system or running
# scologin start