Technical article 127050

When logging in to an OpenServer6 system using ssh 8-bit characters do not display correctly

OpenServer 6.0.0

Written · Last revised

Problem

I'm using 'Putty' with ssh to connect to a remote OpenServer 6 system.

On the OpenServer6 system 8-bit characters like German Umlaute are displayed incorrectly.

If you run:
# stty -a

you will see that istrip is set.

Cause

By default Putty is using 7-bit character settings, so ISTRIP is
set, and then an ssh to a remote system will also have ISTRIP set.

'ssh' captures the tty settings for the local session, passes them to the remote end and then sshd makes the remote session have the same.

Solution

Either change your .profile and add a line:

stty -istrip
or after you logged in run
# stty -istrip

or change Putty settings for a specific connection. Select

1. SSH -> TTY 2. In the "Terminal modes to send" window select ISTRIP and click on Remove. 3. Set Mode: to ISTRIP 4. Click on Value -> This and type in off 5. Click on Add 6. Save your session

From the Xinuos technical article database, record 127050. Reproduced with permission. The original is at www.sco.com/ta/127050, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.