Technical article 114624

Where can I find the boot disk images on the installation CD?

OpenServer 6.0.0OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.0.0UnixWare 7.0.1UnixWare 7.1.0UnixWare 7.1.1UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

My CD won't boot and I need to use the boot disks to boot my server. Where can I find the images of these boot disks on the CD ?

Solution

From Windows:
1.  Insert CD Number 1 into the your CD-ROM Drive
2.  Change directory (cd) to INFO\IMAGES (OSR6/UW7/OU8) or
    IMAGES\BOOT (OSR5) and follow the directions described in the
     README.

From OpenServer6, UnixWare 7 or Open UNIX 8:

1.  Insert CD Number 1 into the your CD-ROM drive
2.  Run the following commands:
mount -r -F cdfs /dev/cdrom/cdrom1 /CD-ROM_1
cd /CD-ROM_1
cd /CD-ROM_1/info/images
and follow the directions in "readme.txt".
From OpenServer5:
1.  Insert CD Number 1 into the your CD-ROM drive
2.  Run the following commands:
mount -r -olower -F cdfs /dev/cd1 /mnt
cd /mnt
cd /mnt/images/boot
and follow the directions in "readme.txt".

See also

ta109607, "How do I create the Network installation diskettes needed for a UnixWare 7 network install?"

From the Xinuos technical article database, record 114624. Reproduced with permission. The original is at www.sco.com/ta/114624, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.