Technical article 110336

Which Network Interface Cards support IP failover?

OpenServer 6.0.0UnixWare 7.1.0UnixWare 7.1.1UnixWare 7.1.2UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

Which Network Interface Cards (NICs) support IP failover on UnixWare 7?

Solution

The following cards support IP failover on UnixWare 7/OpenServer6:

driver name/driver  - Description
-----------------------------------------------------------------
cnet/cnet-eisa  - Compaq Netflex-3 series
d21x/d21x10     - Intel 2104x based 10 Mbps Ethernet Controller
d21x/d21x100    - Intel 2114x based 10/100 Mbps Ethernet Controller
e3H/e3H-pci     - 3Com EtherLink XL
eeE/eeE         - Intel(R) PRO/100B / PRO/100+
hfm/hfm         - HP 10/100VG PCI LAN
shrk/osi2300    - Osicom 2300
shrk/shrk       - Matrox Shark NS-100/4
shrk/snapper    - Matrox Snapper NS-100/1
skfp/skfp99     - SysKonnect FDDI PCI Adapter
trps/trps-pci   - IBM Token-Ring PCI Family Adapter
For a more detailed list of cards that these drivers support,
see TA110157, "What network drivers are available with UnixWare
7.1.0?".

If you have a network driver that is not listed above, and want to check for compatibility with IP failover, check this file:

/etc/inst/nd/mdi/<driver>/*.bcfg
where <driver> is the name of the device driver.  In this directory
you will find one or more .bcfg files.  If the file contains this
line:
FAILOVER=true
then that particular driver supports IP failover
NOTES:    In order to test the functionality of the NIC before deployment:

a) Ensure the latest Maintenance Pack is installed,

b) Ensure the latest ND drivers are installed,

See http://www.sco.com/support/download.html

c) Unplug a cable and check it fails over,

d) Where possible, use the Hot Plug functionality to physically remove the NIC while the server is on (under test) to ensure the failover occurs.

If not, then the NIC does not support failover correctly.

Also, it is not recommended to fail over to the second port of the same NIC if the NIC is a dual port card.

Lastly, failback is not automatically configurable via the GUI, therefore the command is manually run as:

# nd failback net<<primary>>
See: http://uw714doc.xinuos.com/en/man/html.1M/nd.1M.html

See also

TA110157, "What network drivers are available with UnixWare 7.1.0?"

http://uw714doc.xinuos.com/en/HDK_concepts/ddT_failover.html
http://osr600doc.xinuos.com/en/HDK_concepts/ddT_failover.html

From the Xinuos technical article database, record 110336. Reproduced with permission. The original is at www.sco.com/ta/110336, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.