Technical article 126701

Will SCO UnixWare and OpenServer run on LSI SCSI controllers that have the Integrated RAID on them (Also known as IM "Integrated Mirroring" and IME "Integrated Mirroring Enhanced")?

OpenServer 6.0.0OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.1.3UnixWare 7.1.4

Written · Last revised

Problem

LSI have in some of their SCSI & SAS Fusion-MPT Technology HBA controllers, a built-in Integrated Raid Technology, also knows as IM and IME.

We know, that the OpenServer 5 "lsil" BTLD and UnixWare 7 "mpt" HBA drivers support the LSI Fusion-MPT Technology, but will it also support it if the IM or IME is enabled to utilize the mirroring functionality?

HARDWARE: SCSI:
          ----
          LSI20320-R - Single Channel Ultra320 with IM PCI-X
          LSI21320-R - Two    Channel Ultra320 with IM PCI-X
          LSI22320-R - Two    Channel Ultra320 with IM PCI-X
LSI53C1020  - single Channel Ultra320 IC with IM PCI-X
LSI53C1020A - single Channel Ultra320 IC with IM PCI-X
LSI53C1030  - Two    Channel Ultra320 IC with IM PCI-X
SAS:
---
LSISAS3041E-R - 4-port SAS with IME PCI-E
LSISAS3041X-R - 4-port SAS with IME PCI-X
LSISAS3442E-R - 4-port SAS with IME PCI-E
LSISAS3442X-R - 4-port SAS with IME PCI-X
LSISAS3080X-R - 8-port SAS with IME PCI-X
LSISAS1064    - 4-port SAS IC with IME
LSISAS1064E   - 4-port SAS IC with IME PCI-E
LSISAS1068    - 8-port SAS IC with IME
LSISAS1068E   - 8-port SAS IC with IME PCI-E
NOTE:     IM and IME is a technology that was developed by LSI on their
          Fusion-MPT SCSI and SAS chips.

LSI Logic Integrated RAID is a highly integrated, low-cost RAID solution on a native SCSI controller.

This is made possible by LSI Fusion-MPT architecture.

Integrated RAID is a true processor-based, hardware RAID solution (not like the Adaptec and others HostRaid technologies, where it is based on software Raid on the controller) designed for system environments requiring redundancy and high availability where a full-featured RAID implementation is not desired or might be cost prohibitive.

Full-Featured RAID means, support for all sort of Hardware Raid levels (Raid 0, 1, 4, 5, 10, ...etc).

visit Wikipedia.org for more infos about RAID levels:

http://en.wikipedia.org/wiki/Redundant_array_of_independent_disks

LSI Fusion-MPT based Integrated RAID options includes: IM that supports RAID 0 and 1. IME that supports RAID 0, 1 & 1E.

IME is only available with the SAS (Serial Attached SCSI) product line.

For more information about LSI Integrated Mirroring, visit LSI website:

http://www.lsi.com/storage_home/products_home/host_bus_adapters/software_solutions/integrated_raid/index.html
http://www.lsilogic.com/files/docs/techdocs/storage_stand_prod/PCISCSICont/Software/ir_ug.pdf

Also info about RAID 1E (Mirroring Enhanced), can be found in Adaptec Website:

http://www.adaptec.com/en-US/_whitepapers/tech/raid/RAID_level_compar_wp.htm#2.3

Solution

Since LSI Fusion-MPT Integrated Raid is a true Hardware Raid within the SCSI / SAS controller, not like HostRAID(TM), the LSI controller will still presents itself to the underline OS as an Fusion-MPT controller, regardless if IM or IME is enabled (used) or not.

Therefore the OpenServer 5 "lsil" BTLD and Unixware 7 / OpenServer 6 "mpt" HBA drivers will also work with IM or IME enabled.

Below is an example under SCO OpenServer 5 and UnixWare 7, with IME disabled and IME enabled:

OpenServer 5.0.7 using "lsil" BTLD, and two MAXTOR ATLAS10K4_36_SCA 36 GB SCSI HD.

The BTLD driver "lsil" ver. 1.04.09 is available to download from:

http://www.sco.com/support/update/download/release.php?rid=192 (The latest OSR507 lsil BTLD is on the btld1.img image)

Or from LSI Website:
http://www.lsi.com/lookup/License.aspx?url=http://www.lsi.com/DistributionSystem/AssetDocument/files/support/ssp/fusionmpt/SCO/SCO_op5_mpt_lsil_10409.zip&prodName=LSISAS1064E&subType=Driver&locale=EN
Without IME
-----------
adapter 0xc800-0xc880 9 - type=lsil ha=0 id=7 Chip=1030 10328
disk               -   -  type=S ha=0 id=0 lun=0 bus=0 ht=lsil
unit=0
Sdsk      -        -   -  cyls=35074 hds=64 secs=32 unit=0 fts=stdb
Sdsk-0             -   -  Vnd=MAXTOR Prd=ATLAS10K4_36_SCA Rev=DFWB
disk      -        -   -  type=S ha=0 id=1 lun=0 bus=0 ht=lsil
unit=0
Sdsk      -        -   -  cyls=35074 hds=64 secs=32 unit=0 fts=stdb
Sdsk-1    -        -   -  Vnd=MAXTOR Prd=ATLAS10K4_36_SCA Rev=DFWB
With IME (Raid 1)
-----------------
adapter 0xc800-0xc880 9 - type=lsil ha=0 id=7 Chip=1030 10328
disk      -        -   -  type=S ha=0 id=0 lun=0 bus=0 ht=lsil
unit=0
Sdsk      -        -   -  cyls=34700 hds=64 secs=32 unit=0 fts=stdb
Sdsk-0    -        -   -  Vnd=LSILOGIC Prd=1030 IM Rev=1000

Unixware 7.1.4 / OpenServer 6 using "mpt" HBA, and two FUJITSU MAS3184NC 18 GB SCSI HD.

The HBA driver "mpt" ver. 1.04.14 is available to download from:

http://www.sco.com/support/update/download/release.php?rid=206

Please note that this version only supports UW714 and OSR600.

Without IME
-----------
# sdiconfig -l
0:0,7,0: HBA     : (mpt,1) LSI Logic 1030 10329
  0,0,0: DISK    : FUJITSU MAS3184NC       5205
  0,1,0: DISK    : FUJITSU MAS3184NC       5205
  0,8,0: HBA     : SDR     GEM318          0
1:0,2,0: HBA     : (ide,1) Generic IDE/ATAPI
  0,0,0: CDROM   : HL-DT-STDVD-ROM GDR8163B0F15
With IME (Raid 1)
-----------------
# sdiconfig -l
0:0,7,0: HBA     : (mpt,1) LSI Logic 1030 10326
  0,0,0: DISK    : LSILOGIC1030          IM1000
  0,8,0: HBA     : SDR     GEM318          0
1:0,2,0: HBA     : (ide,1) Generic IDE/ATAPI
  0,0,0: CDROM   : HL-DT-STDVD-ROM GDR8163B0F15

The only downside of this, is that there is no CLI utility in the "lsil" and "mpt" packages.

Therefore, if a disk in the RAID-1 goes dead, OpenServer 5 and UnixWare 7 will still be running but the disk failure will not be detected by the OS and hence nothing gets logged in the syslog or console.

This because there is no monitor daemon to monitor the Raid set within the SCO OS.

Check with the hardware manufacturer to see if there is a disk monitor light available.

NOTES:    The way to find out if your LSI Fusion-MPT SCSI / SAS controller
          supports IM or IME, is when you boot the server and see the LSI
          controller BIOS message.
The messages are:
"LSI Logic Corp. MPT IM BIOS", MPTBIOS-IM   -> with IM support.
"LSI Logic Corp. MPT IME BIOS", MPTBIOS-IME -> With IME support.
"LSI Logic Corp. MPT BIOS", MPTBIOS         -> NO support for IR

The latter you usually see on low end LSIU320 SCSI and OEM Hardware vendors like HP that use the LSI MPT chip on their mainboards.

From the Xinuos technical article database, record 126701. Reproduced with permission. The original is at www.sco.com/ta/126701, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.