Technical article 126188

With multi-core and hyperthreading enabled, I only see eight (8) logical processors when I expect to see sixteen (16) or more.

OpenServer 6.0.0

Written · Last revised

Problem

With multi-core and hyperthreading enabled, some systems will not recognize more than eight logical processors after booting.

Cause

Some systems do not automatically detect the presence of xAPIC hardware needed to use more than eight logical processors.

Solution

To enable the system to use more than eight logical processors, use the boot parameter:

USE_XAPIC=Y
Put the string USE_XAPIC=Y in the "/stand/boot" file to
enable more than eight logical processors each time the system
boots.

Alternatively, USE_XAPIC=Y may be entered as the system boots up:

When the OpenServer 6 logo screen is displayed, press the
spacebar to interrupt the process.  When the "boot" prompt appears,
enter
[boot] USE_XAPIC=Y
[boot] boot

and press the Enter key to continue loading.

NOTES:    This issue will be corrected in the next SCO OpenServer
          6.0.0 Maintenance Pack.

From the Xinuos technical article database, record 126188. Reproduced with permission. The original is at www.sco.com/ta/126188, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.