OpenServer 5.0.5 technical articles
888 articles from the Xinuos database that name OpenServer 5.0.5. Showing 801–850 of 888.
- The find(C) command does not locate files by name when starting from a subdirectory.
I am not seeing consistent behavior using the find(C) command.…
- I get the error "WARNING: table_alloc - Failed to get address space for mnode table".
I have increased the NSTRPAGES parameter to 4000 in my kernel using configure(ADM) but when I reboot using the new kernel, I get the error messages:…
- My system panics with "PANIC: exit cannot exec /etc/init (PID 1) status 9."
My machine panics during startup with the error message:…
- The command "who am i" returns no data when I have used su(C) to another user.
(Note that "sco_OSr5" refers to an SCO OpenServer 5 system and "sco_OSr3" refers to an SCO Open Desktop 3.0 system.)…
- I get the message "Error: Incorrect SCO ISAM Runtime System Installed: 0".
I get the following message when I boot my SCO OpenServer 5.0.0 system into multiuser mode:…
- I've installed my system and now I need to know about configuring it.
I've installed my machine successfully and now I need to know about configuring the machine.…
- How can I telnet into a SCO Unix system as the root user?
When trying to telnet into a UnixWare system as root, I get this message:…
- uname(C) and getserno(C) do not return my OpenServer License Number.
The uname(C) and getserno(C) commands do not return the License Number (known as serial number in previous versions of SCO operating systems) of my SCO OpenServer Release 5 system.…
- removepkg(ADM) does not allow the removal of packages.
When I attempt to use removepkg(ADM) to remove a product that was installed using installpkg, the following occurs:…
- idmkreg reports "error updating space.c for Stp" when the kernel is relinking.
The system's tape configuration has become corrupt.…
- How to check when a SCO OpenServer or Unixware product license was installed or expires.
If an evaluation or limited time COLA (license; certificate of license and authenticity) has been applied to a system, how can the expiration date be checked? Similarly, how can I tell when …
- How can I debug SCO Visual Tcl scripts?
Insert this command line into your Tcl script to enable tracing:…
- How can I monitor disk filesystem space and the syslog automatically?
I want to monitor certain filesystems on my host. If the space left on a particular filesystem is lower than a threshold, the System Administrator should be notified.…
- "putc - Out of clists (NCLIST = xxxx exceeded); yyyy failures so far".
My system is running out of clists even when the NCLIST is set at very high values. Increasing the NCLIST kernel tunable parameter only allows the system to run longer between crashes. In so…
- Try to run sar, get: "sar: Can't open /usr/adm/sa/saXX".
When I try to run sar(ADM), I get an error message similar to:…
- "No space on ram disk" error when restoring root filesystem.
I am attempting to restore my root filesystem using tape backups and emergency boot and root floppy diskettes.…
- How to configure remote line printing with IBM AIX.
How can I configure an IBM AIX system to act as a print server for my SCO UNIX system?…
- Is it possible to take an ASCII screen dump of a Vtcl(TCL) based program?
A program using vtcl(TCL) can be run in curses(S) (character) mode, by unsetting the DISPLAY environment variable. To capture the screen output, use a scoterm(XC) emulator, and unset the DIS…
- How can I get a secondary filesystem to mount at boot time?
I want to be able to mount a secondary filesystem (such as /u) at boot, so I can have access to the content in single-user mode. I've tried using the "At System Startup" option in the File S…
- How do I add a SCSI or IDE disk that has data I want to keep?
I want to add a SCSI or IDE hard drive and maintain the data.…
- Log in and get "no utmp entry. You must log in from lowest level -sh".
I am trying to log in as a user, or as root in multiuser mode. After entering the password, this error message is displayed age and the system will not return a prompt:…
- Re-installing various boot files onto my hard disk on OpenServer 5.0.x
My system is failing to boot to the Boot: prompt and I believe that the Masterboot or Partition Boot Blocks may have been damaged. How do I install the various boot related files from my fil…
- I get "No user licenses were found on this machine" message at boot time.
No user licenses were found on this machine. Please boot single user and correct this situation. Licensed software will not operate until user licenses are installed.…
- I get "No such device" (ENODEV) when opening /dev/ptmx more than 16 times
I am using STREAMS-based pseudo-terminals by opening the ptmx(M) device node. However, when I attempt to open this device for the 17th time, the open(S) routine returns the error code 19 ("N…
- "Out of inodes" error when creating boot/root floppy on SCO OpenServer 5.
When I try to create an emergency boot floppy disk, this error message occurs:…
- I get the error "LOGIN: Upgrade license missing" when I log in to my system.
I have upgraded my system from SCO XENIX/UNIX to SCO OpenServer Enterprise Release 5.0.0, and when I log in to the system on /dev/tty01 I get the error:…
- fsck(ADM) is reporting read errors on block 0 of my root device.
NOTICE: Sdsk unrecoverable error reading scsi disk 0 dev 1/40 (ha=0 id=0 lun=0) block=0 medium error: unrecoverable read error…
- Recover OpenServer 5 root filesystem after crash if backups, boot/root exist.
I need a quick recovery method to recover from a system crash in which the root file system is unmountable.…
- How to perform push-down network software installations.
I would like to know how to perform push-down software installations over the network.…
- Why is the License for my SCO Unix expired?
I have just purchased and installed SCO Unix Release x.x and have correctly entered the License Number and the License Code from the "Certificate of License and Authenticity" that I received…
- OpenServer 5, Root gets "permission denied" error message on network backups.
I then telnet/rlogin into System B and create the file /.rhosts on System B, establishing user equivalency for System A.…
- "Licensing Policy Manager Daemon (ifor_pmd) has terminated" at boot time.
The system has been running for some time without problems, but now when the system is booted, this message occurs:…
- Printers are missing after doing a reboot; lpstat does not list them or on trying to add a new printer get a "Destination <printer> is unknown to the LP print service".
When the machine is rebooted, some of the printers are missing and the only way to bring them back is to re-create them.…
- Getting filesystem related-panics and/or filesystem corruptions.
System using SCSI hard disk(s) is panicing with filesystem related panics (for example: "HTFS: Free block <blkno> epi freed....."), or the filesystem appears to become corrupt (for example, …
- Visual Tcl programs don't accept the "-display" option.
A Visual Tcl program is not an X application, so it doesn't understand the X Toolkit options.…
- SCO OpenServer Release 5 is not installing on my SCSI system.
I am installing SCO OpenServer Release 5 on my SCSI system. There are two distinct instances of failure:…
- How to use various PCL typefaces available on HP LaserJet III & IV printers
I would like to know how to print using the various typefaces available in PCL mode on an HP LaserJet III or IV printer. Sometimes, when I try to select a certain typeface by specifying "lp"…
- How to locate SUID (setuid) and SGID (setgid) files on your system.
How to locate SUID and SGID files.…
- How to configure MMDF to allow multiple domains for the local system?
would all be accepted as mail for the user 'username', on the local system (fairy.co.uk).…
- My SCO Unix panics with "Too many queued CPU# interrupts" or "Unable to freeze processor"
My SCO Unix system panics with the error message "Too many queued CPU# interrupts" (where # is some number) or "Unable to freeze processor"…
- I get WARNING: SCSI boot option(s) ignore.
I am getting the above warning message after configuring my SCSI tape drive.…
- Restoring the contents of certain directories from a cpio backup.
How to restore the contents of certain directories from a cpio backup.…
- How do I convert tabs to spaces in a text file using SCO UNIX/XENIX/OpenServer?
I want to convert all of the tabs in my text file to spaces. Reasons for this include improper indentation when printing, a discrepancy between the operating environment and the file tab siz…
- Generate report of login activity and lock status of users/terminals.
Is it possible to generate a report of the lock status or login activity of terminals and users from the command line or sysadmsh?…
- Get warning message when quitting divvy utility under Version 4.0.
Every time I quit the divvy utility in Version 4.0 of SCO UNIX System, I get the following warning message:…
- Using standard interface script; stop extra formfeed and banner.
When printing with the standard interface script an extra formfeed is coming out between files and I want to stop the banner from printing.…
- How do I set up UUCP over TCP/IP with the Transport Layer Interface?
How do I set up UUCP over TCP/IP with the Transport Layer Interface?…
- Minimum length of user account names configurable.
Can user account names be less than 3 characters or more than 8 characters?…
- Is it necessary to type sync before typing haltsys or reboot?
Is it necessary to type sync before issuing the haltsys or reboot commands?…
- What are the basics for using auditing in SCO UNIX or Open Desktop?
What are the basics for setting up and using auditing?…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.5?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing