OpenServer 5.0.5 technical articles
888 articles from the Xinuos database that name OpenServer 5.0.5. Showing 851–888 of 888.
- How do I change the system's name or IP address?
where "newname" is the new system name.…
- My system panics with the message "panic PFNTOPFDAT:000000xx"
The system panics with the following error message:…
- System hangs "Type CONTROL-d" or "Current System Time" prompts.
This article only pertains to the products listed in the RELEASE section above.…
- Set up lpd (remote) printing; can't print locally and/or remotely.
After setting up the lpd remote print daemon I can't print or I can print from the network but not locally.…
- Receiving "WARNING: portmapper on server [IP] is not responding" or "WARNING: NLM: RPC call failed: RPC_PMAPFAILURE".
I get the following message on my screen:…
- Problems changing passwords or creating users after trying to remove NIS
I configured a system to use NIS, but I don't want to run it anymore.…
- Known problems and solutions for NIS in SCO OpenServer Release.
This document lists some known problems with NIS in SCO OpenServer and includes several patches or workarounds.…
- NFS startup gives "statd:cannot talk to statd at <client_machine>"
When SCO NFS server is going into multiuser mode, or SCO NFS is restarted, the following error appears:…
- Merge takes several minutes to start up when $HOME is NFS mounted.
When a user's home directory is on an NFS mounted filesystem, it takes several minutes for Merge to start up.…
- Error from network card: "Cannot automatically determine transceiver" when booting.
WARNING: Etherlink III unit0: ERROR: Cannot automatically determine transceiver…
- Where can I find new and revised drivers for network cards on SCO OpenServer 5?
SCO OpenServer Release 5.0.4 (driver support not found in shipping product):…
- Using Intel Pro/100B NIC: "WARNING: eeE: Allocb failure during initialization".
On my server using the Intel Pro/100B network card ("eeE" driver), I occasionally see this error message:…
- Which Intel networking products are supported in the SCO environment?
Model names indicate the I/O bus on which the product runs.…
- I am unable to create a new file on a mounted NetWare volume.
Now I am able to write to the file, so if I run:…
- I cannot install SCO FoxBASE+ on SCO OpenServer
During installation the following errors are displayed:…
- Running dbXtra or dbxtra in the background loses functionality.
displays the "dialog_popup" window; however, when you enter the name of an executable file, the file is not displayed in the source window.…
- 3.2v4.2-based application using floating point code runs incorrectly on OpenServer 5.0.4.
If the code is *compiled* and executed on OpenServer 5.0.4, then it will work correctly.…
- How to use the F_SETBMODE option to fcntl(S).
Three requirements of the operating system environment need to met in order for F_SETBMODE to work properly:…
- I want to know what the /etc/utmp and /etc/wtmp files contain.
I want to view the contents of the /etc/utmp and /etc/wtmp files.…
- Arcserve, What is the ARCserve database and how do I maintain it?
The ARCserve database stores information about backup jobs that have been run, tapes used for backups, and remote clients that are available for backup.…
- ARCserve/Open can't contact the tape devices on the system.
After installing SCO ARCserve/Open on the system, when selecting the Device Management option from the ARCserve menu, the following popup error message is displayed:…
- ARCserve or ARCserve database keeps shutting down, or a database is unreadable.
SCO ARCserve is exhibiting one of the three problems listed below:…
- ARCserve is unable to access a supported tape drive with Adaptec 1522.
After installing SCO ARCserve with an SCO UNIX-based system that uses an Adaptec 152x or 151x controller using the SCO "smad" driver, SCO ARCserve is unable to access an SCO ARCserve support…
- I cannot access Exabyte EXP-8900 with ARCserve emergency boot/root floppies.
After installing ARCserve with this Exabyte EXP-8900 rev V35c, ARCserve is able to back up and restore files with the Exabyte EXP-8900. If emergency boot/root floppies are created with the A…
- ARCserve causes the system to slow to an unusable state.
After SCO ARCserve has completed a backup the SCO UNIX system becomes very slow while ARCserve re-indexes its database.…
- I can't use my tape changer after installing the ARCserve/Open changer option.
2. Select the Device Management option from the main menu options.…
- I can only back up or restore UNIX clients from the command line with ARCserve/Open 2.2.0.
There are two workarounds to this issue.…
- Configuring AFPS shared client printing to an NT 4.0 Server.
I am trying to configure my SCO AFPS system to be able to print to a printer that is shared out by a network connected Microsoft NT 4.0 server. I have followed the instructions to set up my …
- How do I load and use a LAN Manager Client module with SCO AFPS?
To load the LAN Manager Client (LMC):…
- I cannot log in or connect more than 3 clients using AFPS on OpenServer Host.
I am running the SCO Advanced File and Print Server product (AFPS) on an SCO OpenServer Host system using the NetBEUI network protocol. I can only log in a maximum of three clients. Any atte…
- AFPS does not show the labels on CD-ROM shares.
If I mount(ADM) a CD-ROM on my SCO OpenServer system and share it out to networked PC clients as an AFPS share, my Windows 95 client is unable to see the CD-ROM label usually seen by highlig…
- AFPS printing with processor script gives "print request canceled" mail message.
When my printer is configured under SCO AFPS to use a print processor script, and the print request physically prints or is copied to a file, the "root" user on the system receives a mail me…
- I can't manage AFPS shares from the graphical desktop when using SCO OpenServer 5.0.4, 5.0.5.
After upgrading to, or installing, SCO OpenServer Release 5.0.4, I can't administer Advanced File and Print Server shares from the SCOadmin graphical desktop.…
- I can't set up a BDC using the default domain name "DOMAIN".
During the installation of the Advanced File and Print Server, you are asked to fill in the details of the Advanced Server Configuration as detailed below. The Domain name is set to "DOMAIN"…
- My AFPS server does not respond for large numbers of "/etc/lmhosts" entries.
The AFPS server does not respond to any client connections or to any "net" commands.…
- How do I use SCO OpenServer 5.0.x LAN Manager Client (LMC) printing?
SCO provides a LAN Manager Client module as part of the SCO OpenServer 5.0.x product release. How do I use the printing option of this module?…
- The AFPS server is not starting, how can I troubleshoot this problem?
To troubleshoot the problem it is best to break the problem into steps:…
- SCO Advanced File and Print Server Releases and Supplements.
What have been the releases of SCO Advanced File and Print Server to date?…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.5?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing