OpenServer 5.0.5 technical articles
888 articles from the Xinuos database that name OpenServer 5.0.5. Showing 551–600 of 888.
- I see the error "pppd: Fatal error: Interface 'du0' is already in use" in my /usr/adm/pppd.log file.
I see the error "pppd: Fatal error: Interface 'du0' is already in use" in my /usr/adm/pppd.log file.…
- I try to start a PPP connection and get "pppd: Fatal system error: Can't ifconfig du1 (SIOCSIFADDR): File exists".
I see the error "pppd: Fatal system error: Can't ifconfig du1 (SIOCSIFADDR): File exists" in my /usr/adm/pppd.log file when trying to start a PPP connection.…
- Reading mail through Netscape Communicator 4.0.5b, only the header line is displayed.
When I read mail through Netscape Communicator 4.0.5b, only the header line of the message is displayed. That is, I see the Subject, Sender, Date, and so on, but I don't see the actual text …
- What problems are addressed by OSS495C, the UDK Compatibility Module Supplement, and how is it installed?
OSRcompat shim for shmctl() incorrectly maps IPC_SET to IPC_RMID.…
- What Year 2000 Date Processing problems are addressed by Release Supplement 505A?
What Year 2000 problems are fixed if SCO OpenServer 5.0.5 Release Supplement 505A (rs505a) is applied to my system?…
- How do I configure additional logical drives that I configured through my Hardware RAID Configuration Utility?
I don't know the SCSI ID and logical unit number (LUN) to configure my additional logical drives through "mkdev hd", after configuring these logical drives through the Hardware Raid Configur…
- My Netscape Communicator 4.0.5b is no longer licensed.
There are two methods to re-license Netscape Communicator 4.0.5b, both of which must be done in single-user mode:…
- I'm trying to use OpenServer 5 on an IDE disk greater than 8GB, but can only access 8GB.
Currently, the greatest size of hard disk that OpenServer is able to automatically access is 8GB. However, if we can get the correct disk geometry known to the kernel, then it should work su…
- Diagnostic script for checking all permissions related to a file.
The error message "Permission denied" appears when trying to access a regular file or directory, or there are other indications that an operation is failing due to improper permissions. Util…
- "/etc/ndc: stop: named not running" is displayed when shutting down OpenServer 5.0.5, 5.0.6.
When shutting down the system, the following is displayed:…
- Vision97 products fail authentication connecting to SCO OpenServer 5.0.5.
Vision97 products will fail authentication on SCO OpenServer 5.0.5. An error message similar to this will be displayed:…
- Is SLS OSS469, the Networking and SMP Supplement, included in SCO OpenServer Release 5.0.5?
Is Support Level Supplement (SLS) OSS469D, the Networking and SMP Supplement, included in SCO OpenServer Release 5.0.5?…
- Is OSS485A, the Memory Supplement, included in SCO OpenServer Release 5.0.5?
Is Support Level Supplement (SLS) OSS485A, the Memory Supplement, included in SCO OpenServer Release 5.0.5?…
- What is SLS PTF7123A, the UnixWare/OpenServer Development Kit (UDK) Supplement?
These problems are occurring when running the UnixWare/OpenServer Development Kit (UDK) 7.0.0 on SCO operating systems:…
- netconfig(ADM) hangs when adding a LAN adapter after installing OSS491A.
After installing Support Level Supplement (SLS) OSS491A, the Kernel and SMP Supplement for OpenServer 5.0.5, attempting the following procedure results in netconfig hanging (requiring it to …
- Compaq Proliant with SCO OpenServer 5.0.x: SMP doesn't see my second CPU.
After installation and licensing of the SMP product, only one CPU continues to be recognized. This is confirmed by running the hw command.…
- How can I discard queued data when closing a socket?
Even using shutdown(SSC) to shut down both the read-half and write-half of the socket connection will not totally discard all the queued data.…
- I get "Unable to get complete data for 'Printer Control'" under OpenServer 5.0.5 SCOadmin Printer Manager.
Unable to get complete data for 'Printer Control' Failed to retrieve the following attribute(s) of local printer <printer>: ==>printerRemoteAccessStatus ==>printerJobAcceptanceStatus ==>prin…
- When a JDK utility is run, the message "Warning: JIT is unlicensed, will not be used" is returned.
When a JDK utility such as /usr/java/bin/javac or /usr/java/bin/appletviewer is run, the following message is displayed:…
- 3Com 592 and 3Com 597 EISA network cards do not work in SCO OpenServer 5.0.5, 5.0.6.
WARNING: e3G : cannot install intr vecno=65535, type=4, IPL=5 Bad interrupt vector 65535…
- SLS OSS495A fails to install on SCO OpenServer 5.0.5.
Attempting to install Support Level Supplement (SLS) OSS495A, the OSRcompat Patch, using the command:…
- How can I test changes made to my sendmail.cf file?
I have made changes to my sendmail.cf file, and I want to test them before installing the new configuration. How can I do this?…
- Compaq system displays "CPU2 cha: scsi bus reset" message on boot when SMP is licensed on the system.
With SMP licensed on my system, when I try to boot I get the message:…
- When I log in to OpenServer, my supplementary groups aren't always recognized.
When logging in to the console, graphical desktop, or through a remote session, the supplementary group(s) associated with that user are not always recognized.…
- Active PPP connection times out if idle=1 under SCO OpenServer 5.0.x.
When I have "idle=1" set in /etc/ppphosts, the PPP link drops even when I have networking traffic moving across the link.…
- The 80286 XENIX binaries are core-dumping on SCO OpenServer 5.0.5, 5.0.6.
The OpenServer 5.0.5, 5.0.6 versions of x286emul and i286emul respond to signals differently than previous versions and may cause adverse behavior such as core dumps.…
- I get a checksum error after running SCOadmin software verification in OpenServer 5.0.5 with Merge 4.0.2b/DOS installed.
After running software verification in OpenServer 5.0.5, a checksum error is found in /opt/K/SCO/Merge/4.0.2.b/usr/lib/merge/bios.rom with Merge 4.0.2b installed and DOS loaded from the Wind…
- What problems are addressed by OSS491A, the Kernel and SMP Supplement for OpenServer 5.0.5? - Obsolete
Under SCO OpenServer Release 5.0.5, I am experiencing problems with either the kernel and SMP portions of the operating system, or am havings problems or panics with the apic driver.…
- My network printers configured with lpd are missing in Printer Manager.
I have configured my remote network printer in Printer Manager without errors. I am able to print and "lpstat -t" lists my network printer. However, when I go back into Printer Manager, my n…
- What is SLS OSS459B, the COFF Linker Supplement for OpenServer Release 5.0.4 and 5.0.5?
Support Level Supplement (SLS) OSS459B, the COFF Linker Supplement, corrects this problem. This SLS was created for Oracle7.…
- How do I install SCO OpenServer 5.0.4, 5.0.5, or 5.0.6 on a Dell PowerEdge 6300?
My system console goes blank when trying to install SCO OpenServer Release 5.0.4, 5.0.5, or 5.0.6 on a Dell PowerEdge 6300.…
- mktime(S) does not normalize the tm structure correctly.
The OpenServer 5 mktime(S) function does not correctly normalize its input structure. For example, it does not correctly calculate going forward from the 24th of September to the 24th of Oct…
- Panic "Watchdog ReInitMemory for 0 Unexpected trap in Kernel Mode" with Intel Pro100b.
My system panics randomly with the message:…
- What is the Strong Encryption Supplement and how do I install it on SCO OpenServer 5.0.4 or 5.0.5?
What is the Strong Encryption Supplement and how do I install it on my SCO OpenServer Release 5.0.4 or 5.0.5 Operating System?…
- Is DHCP installed on my OpenServer Enterprise inplace upgrade from 5.0.4 to 5.0.5?
I have performed an inplace upgrade from SCO OpenServer Enterprise System Release 5.0.4 to OpenServer Enterprise 5.0.5, and I do not see the DHCP Server Manager in Scoadmin -> Networks on my…
- Configuring an incoming PPP connection to UnixWare 7 from OpenServer 5.0.4 SCO PPP.
I want to connect to a UnixWare 7.0.1 system via a modem PPP connection from an SCO OpenServer 5.0.4 system using SCO PPP (instead of PPP from Morning Star) link. How do I set this up?…
- In certain versions of SCO OpenServer, scoterm(XC) handles Caps Lock incorrectly.
In certain situations when using multiple scoterm(XC) windows, the status of Caps Lock is not correctly recognized.…
- Changing the baud rate for a serial printer using SCOadmin or lpadmin on the command line doesn't affect the comms speed.
but the configured printer baud rate does not seem to change; garbled text can appear on the printer which is physically running at a baud rate different from 9600.…
- Mail to certain domains is bouncing with "mail deferred connection reset".
I am unable to send mail to certain domains. The mail bounces with the message:…
- After enabling virtual domains, the default homepage images are not displayed.
After enabling virtual domains using the Internet Manager, the default homepages at:…
- Configuring the system to auto-boot quickly with few boot messages.
I want to configure the system to auto-boot as quickly as possible into multiuser mode, with as few boot messages and prompts as possible.…
- How do I create a private, non-root link kit for development and testing purposes?
The SCO UNIX link kit is a set of files and utilities beneath /etc/conf that provides configuration, tuning and relinking of the UNIX kernel and the kernel environment.…
- How can I set the maximum message size limit in sendmail?
I need to limit the size of messages sent to and/or through my mail server.…
- How to include a space between "send" fields in a chat script.
(Or some variation of this -- every ISP has different requirements.)…
- Is there a limit on the number of Virtual Disk Pieces under Virtual Disk Manager (VDM)?
The maximum number of virtual disk pieces per disk partition is limited to 30 per disk partition.…
- I cannot build a termcap curses application on SCO OpenServer Release 5.
The termcap library, /usr/lib/libtcap.a, is not furnished with the SCO OpenServer Release 5 development systems.…
- When I start my Netscape browser, I get the error "Netscape's network connection was refused by the server: The server may not be accepting connections or may be busy..."
When I start my Netscape browser, I get the error:…
- After setting the default LANG on my system, locale(C) still reports LANG=C.
I have selected the correct Locale information for my Country during Initial System Load or through the International Settings Manager, but the output from locale(C) does not reflect this in…
- newaliases(ADMN) or /usr/lib/sendmail -bi fails to run on SCO OpenServer 5.0.5.
Running the command newaliases(ADMN) results in these error messages:…
- sendmail inserts an exclamation point and carriage return into mail messages.
Mail delivered via sendmail 8.8.5 (or later) arrives with an exclamation point and carriage return inserted into lines that are over 990 characters long. That is, these long lines are split …
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.5?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing