OpenServer 5.0.5 technical articles
888 articles from the Xinuos database that name OpenServer 5.0.5. Showing 601–650 of 888.
- What is SLS OSS486A, the UDK Installation Supplement for SCO OpenServer 5.0.5?
When installing the UnixWare/OpenServer Development Kit on SCO OpenServer 5.0.5, portions of the installation fail.…
- SCO OpenServer 5.0.5 installation halts on a 16MB or 32MB system.
After specifying a SCSI CD-ROM as the media device for installing SCO OpenServer, the installation halts with the following messages:…
- How to install or add Client Connection licenses to ARCserve.
When trying to add a client to my ARCserve backup network, I get the error message:…
- Cross-reference list of NFS commands and files for UnixWare and OpenServer.
The commands and filenames are different from SCO OpenServer to UnixWare.…
- Using semctl(2) in a UODK compiled binary on SCO OpenServer 5.0.4 causes a core dump.
union semun { int val; struct semid_ds *buf; ushort *array; } arg ;…
- Digital FDDI adapter hangs under load in an SMP system.
SCO OpenServer 5.0.4 SMP systems using the built-in dfx driver with Digital DEFPA DA or DB FDDI PCI Network Adapters can, under load, hang until the system is rebooted. Fifteen client telnet…
- Users can't log in; they get "cannot change to home directory" and the login: prompt reappears.
I have created several new accounts on my system, but some users cannot log in. They enter the correct account name and password, but they get "CANNOT CHANGE TO HOME DIRECTORY" and are retur…
- Backup Manager fails to save options under SCO OpenServer 5.0.4 and 5.0.5.
Intending to set up a backup schedule, I launch the Backup Manager, choose "Schedule" option from the menu, and pull down to "Add/Modify Filesystem Schedule...". If I change "Perform complet…
- Font-specific menu items are missing from "File" and "View" menus on Windows 95 running under Merge 4.
A workaround is to add the following to your personal autoexec.bat file:…
- sh(C) hangs when the -n option is used to check the syntax of a script.
When using the -n option to sh(C) to check the syntax of a script, it never returns; it runs forever consuming CPU time.…
- What information should be gathered to help diagnose why an OpenServer 5.0.x system is experiencing panics and/or hangs?
What follows is not a full list of items. There will be more information that may need to be gathered (on a case-by-case basis) but the following can serve as a starting point:…
- I get the message "ftpd: Bad value for -u" when using the -u option for ftpd.
I am trying to set the umask option with ftpd in the /etc/inetd.conf file. I was able to use the following syntax in Open Server 3.0, which allowed the put command to transfer text files wit…
- The scoansi terminal type is unknown by pre-SCO OpenServer 5.0.5 systems.
When I rlogin in from my SCO OpenServer 5.0.5 server to an SCO OpenServer 5.0.4 or earlier server, I get this message:…
- Installing or updating a driver on an installed OpenServer 5.0.x system from a Boot Time Loadable Device diskette.
You can use the btldinstall(ADM) command to install or update a driver(s) from a BTLD (Boot Time Loadable Device) diskette.…
- How to manually configure SCO PPP for incoming/outgoing connections.
Select Hardware-->Add New WAN Connection-->SCO TCP/IP driver--> SCO TCP/IP-->Add…
- Windows NT systems can no longer see the AFPS Domain Controller after AFPS has been removed and reinstalled.
When I try to log in to an AFPS domain from Windows NT, I get an error similar to the following:…
- How do I set up guest ftp on SCO OpenServer 5.0.x?
How do I set up guest ftp on my server?…
- What is SCO ARCserve/Open from Cheyenne Release 2.2.0k?
What are the new features in SCO ARCserve/Open from Cheyenne Release 2.2.0k and how can I obtain it?…
- When I press the delete key, slattach dies.
The slattach command, used to manually start a slip connection, dies if it receives a SIGINT from the controlling tty. Usually this happens because the delete <Del> key is pressed.…
- Kernel relink fails with "too many array initializers" after adding a SCSI tape unit.
... ... Do you wish to create a new kernel now? (y/n) y…
- /etc/passwd is missing or 0-length; can I re-create it from the user information in the tcb directories?
My /etc/passwd file is missing or corrupted, and I have no backups.…
- I get a Stage One Boot Failure after installing SCO OpenServer.
SCO OpenServer installs without a problem on the server, but the operating system then fails to boot. Errors similar to the following come up on the screen:…
- How can I capture the screen output from a kernel relink to a file?
It is necessary to redirect stderr to stdout and output stdout to a file, in order to capture the kernel relink screen output. To do this, take these steps:…
- Using pg(C), then shell escape and execute mesg(C) changes the file permissions on /dev/tty.
I execute the command pg(C) either as root, or as a regular user, and take these steps:…
- Can I align double integers on 32-bit boundaries within my program?
I understand that aligning a 32-bit quantity such as a 'double' on a 32-bit boundary will result in faster data accesses since this quantity can be read/written in a single bus cycle instead…
- The sample code from the Network Programmer's Guide doesn't compile.
I am trying to run the Sample client program taken from the SCO Development System Network Programmer's Guide and Reference, Chapter 7, Example 7-12.…
- How to add an unsupported modem to the SCO Modem Manager.
My ELSA Microlink 28.8TQV Modem is neither supported under SCO OpenServer Release 5.0.4 nor UnixWare 7. How can I configure my modem successfully for these products?…
- Does SCO support the ATAPI Zip drive on SCO OpenServer?
I am trying to find out if SCO OpenServer provides support for the ATAPI Zip drive.…
- How do I add a SCSI hard drive under SCO OpenServer 5.0.x?
How do I add a SCSI hard drive under SCO OpenServer 5.0.x?…
- Trying to write to my parallel port gives "/dev/lp0: cannot create".
I ran 'mkdev parallel' to configure a parallel port, and when I try to send data to the port, I get the message:…
- How do I determine the version of BIND that is running on OpenServer 5?
I am running a nameserver (named) and need to know what version of BIND is running.…
- When installing a supplement I get "Error: the patch could not be applied to SCO: Unix 5.0.X. component is in an invalid state."
During the installation of a system supplement, I get this error:…
- Why doesn't SCO OpenServer 5.0.4 or 5.0.5 detect my network card?
When /etc/netconfig is run, my network card is not detected. The following shows how /etc/netconfig detects which cards it has in the system. The pathnames are specific to a 5.0.4 system; fo…
- The 5.0.4 and 5.0.5 SCOadmin Backup Manager restore selection buttons don't work.
When I use the SCOadmin Backup Manager menus as follows:…
- sdb(CP) can't find some functions or symbols in my program.
where <program> is my program name and <function> is a function in the program.…
- How do I switch off the logging facility in the SCO OpenServer 5 Popper Daemon?
There is an error in the online 'popper(ADM)' man page.…
- Gathering information when SCO OpenServer 5.0.x system panics but does not produce a valid dump or the system hangs.
I have an SCO OpenServer system that is experiencing one of the two following problems:…
- How can I increase the maximum size of a file I want to copy/move from a Windows system to an AFPS server (running under OpenServer 5.0.x)?
The maxfilesize limit determines the maximum file size that can be copied or moved from a Windows system to the AFPS server. How can I increase this?…
- Why does the sort command cause a core dump on large files under OpenServer 5?
When I try to sort a large file with the command:…
- What filesystem tuning enhancements are included in OpenServer 5.0.4?
SCO OpenServer 5.0.4 incorporates the functionality provided by the Large Server Supplement (LSS) 1.1.0, which has been obsoleted. SCO OpenServer 5.0.4 includes the following enhancements to…
- SCO OpenServer 5 mktime(S) doesn't correctly handle the leap year in year 2000.
The SCO OpenServer Release 5 mktime(S) function does not correctly calculate the leap year that occurs in the year 2000.…
- Trying to quit out of the mkdev tape routine leaves the system in an inconsistent state.
When I try to quit out of mkdev tape, it still creates the special device files and applicable links. Choosing "q" to quit shows:…
- How do I disable or enable the Compaq Wellness Driver (cpqw)?
How do I disable or enable the Compaq Wellness Driver on my server?…
- OpenServer 5, How do I debug Scoadmin Account?
(Note: The UNIX path is different for 5.0.0Cl, 5.0.2Dp, 5.0.4Eb, 5.0.5Eb, 5.0.6Ga )…
- I didn't configure Database Services during the installation profile and now I need to install an application that requires this.
Follow this procedure to configure the Database Services option. If you are unsure whether an application requires this, see the documentation provided with the application.…
- How can a filesystem be removed if there is no delete function in divvy?
A filesystem needs to be removed and/or re-created for some reason. There is no delete function in divvy that will allow the filesystem to be removed and divvy won't allow a filesystem to be…
- Emergency floppy creation fails with the error message "exec: Too many symbolic links in path" when using SCO ARCserve/Open Release 2.2.0k.
exec: Too many symbolic links in path.…
- How can I mount a Windows 95/NT/AFPS filesystem using LAN Manager Client?
Is it possible to mount a Windows 95 filesystem, directory or AFPS share using the OpenServer LAN Manager Client (LMC) utility?…
- Why doesn't VisionFS show up in my SCO OpenServer 5.0.4, or 5.0.5 License Manager?
SCO VisionFS is licensed, but I don't see it in the SCO OpenServer Release 5.0.4 or 5.0.5 License Manager.…
- VisionFS installation tips and troubleshooting guidelines.
Are there any useful tips I should know before I install the the SCO VisionFS that comes supplied as part of my SCO Operating System?…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.5?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing