OpenServer 6.0.0 technical articles
591 articles from the Xinuos database that name OpenServer 6.0.0. Showing 451–500 of 591.
- After installing SCO OpenServer 6.0.0 MP1 pkgadd and pkgrm commands fail
After installing SCO OpenServer 6.0.0 Maint. Pack 1 (MP1), the pkgrm and pkgadd commands fail with the error below:…
- I see the error "value too large for defined data type".
Even though I have configured my system for large files, I still get the "value too large for defined data type" error when dealing with files larger than 2 Gig.…
- What is `patchck` - the patch management tool?
Use '-o' to look for optional patches, and '-s' to look for security patches.…
- The chsysinfo(ADM) osr5 command option does not set the release correctly.
the version number returned by uname -v is correct but the release is not. uname -r incorrectly returns 5.…
- SCO OpenServer Release 6.0.0 Maintenance Pack 1 Release and Installation Notes
SCO OpenServer Release 6.0.0 Maintenance Pack 1 Release and Installation Notes…
- vi(C) only displays 8 lines when run from a Terminal Emulator connected to OpenServer 6.0.0?
If I connect using telnet within the Terminal Emulator I don't see this problem.…
- What are the main differences between the VXFS and HTFS filesystems on OpenServer 6?
What are the main differences between the VXFS and HTFS filesystems in OpenServer 6.0.0?…
- My OpenServer 6.0.0 syslog file contains "sco_pmd[952]: license [3XX000000/168/1.0] missing dependent product [132/5.7]" errors?
I have installed my OpenServer 6.0.0 system using an OpenServer 5.0.7 Update Service License and have noticed that my syslog file contains the error:…
- Where can I get configuration documentation for MySQL specifically for OpenServer 6, OpenServer 5 and UnixWare 7?
Where can I find MySQL configuration notes for OpenServer 6.0.0, Openserver 5.0.7 and UnixWare 7.1.4?…
- I get "WARNING: stack overflows: 9 in last one minute" on the console when I boot my system
On a freshly booted system I sometimes get the following error message displayed on the console:…
- I cannot access the default DVD/CD-Record device when using the "cdrecord" utility on OpenServer or Unixware 7.1.4 system
I have a notebook with a DVD-RW/CD-RW/CD-R ATAPI device attached to the secondary controller as master.…
- ERROR MESSAGE: "rpcbind: ERROR: could not find any loopback transport. Exiting", Error displayed during bootup and in syslog.
I see the message "rpcbind: ERROR: could not find any loopback transport. Exiting" during bootup and in syslog.…
- OSR6:I am unable to find the log files for WebConnect 5.1.2Aa
I cannot find the log files for WebConnect 5.1.2Aa…
- Broadcom latest SCO OpenServer bcme driver version 10.4.3 fails to initialize and load on systems with BCME 57XX NICs
I have downloaded the latest Broadcom SCO OpenServer 5 bcme driver ver. 10.4.3 from broadcom website:…
- During the installation of OpenServer 6 I received a message suggesting that this is not the OSR6 Installation CD
My system has two internal CDROM drives (IDE) and one external USB drive (CDROM, DVD, REV). When booting off of the OpensServer6 CD when switching to the console the first thing that happens…
- I get "mas_open: MAS_SANITY nlocs corrupted" when running "mpstat" or "rtpm" on a SCO OpenServer 6.0.0 SMP system
When I run rtpm or mpstat, I get an error message "mas_open: MAS_SANITY nlocs corrupted"…
- Permissions are incorrect on Packet Filter devices on a freshly installed SCO OpenServer 6.0.0.
Permissions are incorrect on Packet Filter devices on a freshly installed SCO OpenServer 6.0.0. This can result in a local user being able to modify the packet filter configuration of the se…
- What SATA controllers are supported by the OpenServer 6.0.0 Media Kit?
What SATA Controllers are supported by the OpenServer 6.0.0 Media Kit?…
- How can I display the Euro symbol on my X client on OpenServer 6.0.0?
I have configured my system to enter and display the Euro symbol using the instructions at:…
- How can I use 'mkdev fd' to create floppy emergency boot media for OpenServer 6?
If I try and use The Floppy Filesystem Manager (mkdev fd) to create Emergency Boot and Root floppy filesystems I get the error:…
- Cannot create a new realm with the kadmin(8) command.
I am trying to to initialise the Kerberos Database with information from a new realm but the init command fails with:…
- OpenServer 6.0 - How to restore video settings back to default settings?
The summary below explains how to reset the video settings back to the defaults.…
- OpenServer 6 - manual pages are not accessible through the KDE Help Center.
The manual pages have not been incorporated in the KDE help center. This has been reported to SCO Engineering.…
- Openserver 6.0.0 - cpio fails to create archives of files with large inode numbers.
The above cpio command will fail similarly when attempting to archive any file with an inode number greater that 65535.…
- OpenServer 5 : How do I add a print queue for a D-Link DP-300+ Printer
[ ] Use extended remote printing protocol (only available if printer host is running SCO OpenServer Release 5 or above)is de-selected.…
- "sadc: Error opening output. File:'sadc.c'" in mail indicating problems with output from "cron" command
I have a system that reports the following messages every ten minutes in both syslog & osmlog:…
- How can I mount an ISO image on my SCO Unix system?
How can I mount an ISO image on my SCO Unix system?…
- The Unixware init or shutdown commands fail to change run levels.
The likely cause for this happening is that one of the /etc/inittab processes that init is controlling fails to terminate. init must wait for entries with an action of "wait" (3rd field of t…
- How do I configure smart host functionality for Sendmail on UnixWare 7.1.3?
I want my SCO Unix system, using Sendmail, to forward all non-local mail to a "smart host" on my network.…
- What is OpenOffice and can I install it on SCO Unix?
I would like to install OpenOffice on my SCO Unix platform.…
- How can I change the IP address of my server with a script?
Is there a way to change the IP address of my server automatically in a script?…
- How can I email attachments from UNIX to a Mail Client?
On the UnixWare7 server you will need to have configured Sendmail using "scoadmin mail" to configure your mail system appropriately.…
- How to access a USB floppy drive under SCO UnixWare 7 or OpenServer 6 and install a package or a HBA using pkgadd.
I have a system (Notebook, Server Blade...etc) that has no Legacy Floppy Drive, but only a USB Floppy Drive. I am having trouble accessing the USB Floppy in order to install a HBA driver or …
- How to install a USB Pen Drive Hard Disk on SCO Unix?
How to use or enable a removable USB Pen Drive with SCO Unix?…
- How can MMDF use a "smarthost" for mail routing on OpenServer?
I wish to configure MMDF on OpenServer to use a "smarthost" mail server.…
- Changing root disk controllers without reinstalling UnixWare 7.1.x.
I wish to change my root hard disk controller without having to reinstall UnixWare 7.1.x. Could I end up with a non-bootable hard disk?…
- OpenServer 5 & UnixWare 7 support of HP/Compaq hot-plug tape drives
The HP StorageWorks Internal 20/40-GB DAT drive is supported with both OpenServer 5.x and UnixWare 7.x but is not supported as part of a hot-plug configuration (ie. the hot-plug feature is n…
- I want to create a script or use the command line to send an email with an attachment non-interactively, how can I do this?
The standard mail utility on OpenServer and UnixWare cannot attach files to emails.…
- How to print, view or create PDF files from the command line in OpenServer and UnixWare?
I have received a PDF file and I want to print it out using command-line utilities on SCO OpenServer or UnixWare 7.…
- How many SMP licenses do I need to purchase for Multi Core CPU based system?
I have a machine with one or more Multi Core CPUs. How many Symmetric Multi Processor (SMP) licenses do I need to install to take advantage of the HT capabilities of the CPUs?…
- How to relicense Openserver 5.0.7 with a shipping product license after installing with a 60 day evaluation license
This Technical Article refers specifically to OpenServer 5.0.7 but the same procedure is also advised for later versions of SCO product, including OpenServer6 and UnixWare7.…
- I get the error "custom+ backend process has died", or "Unable to start the Software Manager, possibly because it is already running"
The Software Manager (custom) reports errors and won't show the list of installed software. Some errors seen by this problem include:…
- Is there a command I can run from the command line to find out the Registration Lock for my license?
I would like to know if there is a way that I can generate the Registration Lock for my license without having to run the SCO License Manager?…
- How do I fix "initprivs" system boot or system shut down warning messages on UnixWare 7 and OpenServer 6 Releases?
When I boot or shut down my UnixWare 7 or OpenServer 6 system, I see…
- lint returns "warning: function actually returns double: nanf" on Unixware 7
Running lint against my C program returns a warning if math.h is included:…
- How do I configure Samba 2.2.x and get it started on my SCO Unix server?
How do I configure Samba and get it started on my SCO Unix server?…
- What is the default block size for a tape on UnixWare7/OSR6 and can it be changed?
Most ( but not all ) tape drives default to fixed block 512 on powerup. This is not usually the optimum physical block size for a tape transfer. Usually, a larger physical block size provide…
- How do I re-write the Master Boot Record?
I have had to restore my server using the Emergency Recovery Disks and Emergency Recovery Tape onto a fresh disk.…
- "Unable to run brand command" when running scoadmin license
I am trying to view or modify my license on my SCO Unix server machine with scoadmin(1M) and find that I get an error when the License Manager comes up:…
- How can I print to a SCO Unix remote printer from Windows?
How can I set up a SCO Unix remote printer on my UNIX operating system and be able to print via LPR from a Windows client?…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 5.0.5 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 6.0.0?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing