OpenServer 5.0.6 technical articles
714 articles from the Xinuos database that name OpenServer 5.0.6. Showing 301–350 of 714.
- What is CSSA-2001-SCO.31, concerning the "Sendmail debug input validation buffer overflow"?
An input validation error exists in Sendmail's debugging functionality. This could be used by an unauthorized user to gain privilege.…
- Why does OpenServer panic with a freemsg error during a heavy TCP/IP load?
I am using the Intel eeE driver on an Intel chipset 82559ER and during heavy TCP/IP load my server panics with the following example panic stack traces:…
- scologin is dumping core on Openserver 5.0.6.
Core files are being generated by /usr/bin/X11/scologin in the / directory.…
- Why does documented behavior of setluid(S) depend on system security profile?
This documentation omission has been reported to SCO Engineering.…
- What is CSSA-2001-SCO.25, concerning "various scoadmin/sysadm subprograms have buffer overflows"?
Various programs that scoadmin and sysadmsh use have buffer overflowsi that could be used by a malicious user to gain privilege.…
- What is CSSA-2001-SCO.24, concerning "shell here-documents allow various security breaches"?
Shell here-document processing is vulnerable to a variety of security attacks.…
- Cron jobs don't run after installing OSS642A on a system in high security mode.
On a system in "High" security mode, after installing or removing OSS642A, the Cron Supplement, I get mail messages from cron which contain:…
- OpenServer 5.0.6 double panics with trap type 0x0000000E during user login.
OpenServer 5.0.6 (with Release Supplement 5.0.6a installed) double panics with trap E during a user login. A message similar to:…
- What is CSSA-2001-SCO.20, concerning "remote buffer overflow vulnerability in BSD line printer daemon"?
The BSD-derived lpd daemon is vulnerable to a buffer overflow. This could be used by an unauthorized user to gain privilege.…
- What is CSSA-2001-SCO.8, concerning "/etc/popper buffer overflow"?
The popper daemon /etc/popper was subject to a buffer overflow that could be used by a malicious user.…
- What is CSSA-2001-SCO.17, concerning "vi /tmp vulnerability"?
The vi editor uses temporary names that are predictable. A user could use this vulnerability to write arbitrary files.…
- What is CSSA-2001-SCO.13, concerning "BIND buffer overflows"?
The BIND subsystem contains several buffer overflows, detailed in CERT advisory CA-2001-02. This advisory announces the availability of a preliminary version of BIND 8.2.5. Since there is no…
- What is CSSA-2001-SCO.12, concerning "mana buffer overflow"?
/usr/internet/admin/mana/mana was subject to a buffer overflow that could be used by a malicious user to gain root access.…
- What is CSSA-2001-SCO.10, concerning "telnetd buffer overflow"?
The telnet daemon /etc/telnetd is subject to a buffer overflow problem that could be used by a malicious user to gain unauthorized access to a system.…
- What is CSSA-2001-SCO.1, concerning "curses library, rtpm, atcronsh"?
A buffer overrun vulnerability has been found in the curses library. A malicious user could attack a set{uid,gid} command that uses this library to gain privileges.…
- I get the error "tput: symbol not found: strlcpy" after installing SSE072B.
After installing the System Security Enhancement SSE072B on my OpenServer 5 system, I receive the following error upon logging in:…
- What is SLS OSS642A, the Cron supplement?
Support Level Supplement (SLS) OSS642A, the Cron Supplement, addresses various problems in the cron daemon, including these:…
- ARCserve 2.2.0m, Getting Dynamic Linker: cpio: error opening /usr/lib/libsocket.so.2 when restoring.
I have applied the OpenServer Release Supplement 506a (RS506A) and have installed ARCserve 2.2.0m. I have used ARCserve to generate my Emergency Recovery Disks and have backed up my server u…
- What is SLS OSS638A, the rarpd Supplement for OpenServer 5?
What is SLS OSS638A, the rarpd Supplement for OpenServer 5?…
- The hardware Real Time Clock (RTC) is accurate, but the OpenServer system clock consistently gains or loses time.
The hardware RTC is always accurate, but the OpenServer system clock gains or loses time. For example, /etc/setclk -pv shows output that is similar to:…
- How do I compile a C/C++ program that references Java 1.2.2 code on OpenServer 5.0.x?
I want to call Java code from my C/C++ program. What do I need in order to get this to work properly on OpenServer 5.0.x?…
- Telnet logins fail with syslog error, "inetd[302]: accept: (for telnet) Out of stream resources."
After many users successfully connect and login via telnet, further logins fail, even though I have licenses for more users. In the system log (/usr/adm/syslog), I see these errors:…
- In-place upgrade to OpenServer 5.0.6 hangs forever while running the /opt/K/SCO/Unix/5.0.6G/cntl/cqs script.
In-place upgrade to OpenServer 5.0.6 hangs forever while running the /opt/K/SCO/Unix/5.0.6G/cntl/cqs script.…
- Will my OpenServer 5, UnixWare 2, UnixWare 7, Open UNIX 8 or SCO Linux system be affected by the "Billion Second Problem"?
Will my SCO Operating System be affected by the Billion Second Problem?…
- Will my Open UNIX 8, Open Linux, OpenServer 5, UnixWare 7 or UnixWare 2 system be affected by the "Billion Second Problem"?
Will my SCO Operating System be affected by the Billion Second Problem?…
- When my server boots it hangs after loading the kernel.
My server ran out of disk space in the root filesystem and, after a re-boot, the server is unable to boot or I have run "fsck" on the root filesystem with the "-y" option (to answer Yes to a…
- Is it possible to upgrade my Netscape FastTrack Server?
I'm running Netscape FastTrack Server 2.0.1d on my OpenServer 5.0.4 server and I am getting the following errors:…
- I have upgraded my controller from a 2940 to a 2940U2W and my now my server fails to find the root disk.
I have upgraded my controller from a 2940 (alad) to a 2940U2W (blad), and now when I boot the server fails to find the root disk.…
- If I replace my video card with a card of the same type or I am using MIT the video card reverts to VESA.
I have configured a video card, for example, an ATI RAGE 128, but if I replace it, or if I am using the Mass Installation Toolkit (MIT) to generate images of my server and install on target …
- On a Toshiba Satellite Pro 4600 / Satellite 2800-500 netconfig does not detect the Intel Pro100+ 2449 chipset NIC on OpenServer 5.0.5/5.0.6 even though the driver exists.
I am trying to configure the network on my Toshiba Notebook Satellite Pro 4600 / Satellite 2800-500 with OpenServer 5.0.6. On the notebooks, there is a embedded Intel Pro100+ PCI NIC with 24…
- After installing RS506A, my application fails to link with unresolved symbols in libsocket.a
Since installing Release Supplement RS506A on my OpenServer 5.0.6 system, I can no longer build binaries, which use the static libsocket archive. When I issue either of the commands:…
- Inverse escape sequences do not work as expected in OpenServer 5.0.6.
On releases prior to OpenServer 5.0.6, it was easy to change the background and letter color of a console screen through a shell script. For instance, the following script will print the tex…
- How do I download, compile and install the latest version of SAMBA for OpenServer?
How do I compile and install the latest version of SAMBA, v2.2.1?…
- What does "NOQUEUE: Null connection from ..." in my system log mean?
I am seeing errors in my system log file that look similar to this:…
- How do I install KDE on my OpenServer 5.0.6 server?
KDE is downloadable from the Internet from the following web site:…
- How can I prevent people from telneting to port 25 and relaying or spamming mail from my OpenServer 5.0.6 machine running Sendmail 8.11.0?
People are telneting to port 25 of my Openserver machine and they are spamming or relaying mail through my system; how do I prevent this from happening?…
- I get "No root disk controller found" after installing Release Supplement rs506a.
I get the error "NO root disk controller found" after installing Release Supplement rs506a on a system that is using the Mylex XL 352 or 170 RAID Controller.…
- Installation of rs506a doesn't update currently configured network card drivers (eeE trps smpw spwr).
Installation of rs506a doesn't update currently configured network card drivers (eeE trps smpw spwr).…
- The kernel relink during installation of rs506a fails with the error, Undefined symbol "microdata"...
During the kernel relink phase of the installation of rs506a, I get one of the following errors:…
- Where can I find the boot disk images on the installation CD?
My CD won't boot and I need to use the boot disks to boot my server. Where can I find the images of these boot disks on the CD ?…
- How can I use the shell (sh) to sum some values in a file?
The input file is in the format:…
- How do I install and run SarCheck?
How can I easily analyze my Sar data to help me with Performance Tuning?…
- After installing rs506a, I can no longer do server to server ftp transfers.
Using 3rd party ftp clients, I was able to do server to server transfers until I installed rs506a. Now, any attempts to do this return the error:…
- After upgrading, changes previously made to /etc/ftpaccess are not being recognized.
After installing rs506a, changes made to /etc/ftpaccess are not being recognized.…
- The ftp command "rhelp" hangs when issued on a server with rs506a installed.
When logged into an 5.0.6 ftp server with rs506a installed, the "rhelp" command hangs after printing the list of recognized commands. You can hit the delete key to break out of the hang, but…
- How do I change a license number information after installation time?
How do I change the license number information after installation time?…
- OpenServer 5.0.6 installation halts on a 32MB system.
After specifying a SCSI CD-ROM as the media device for installing OpenServer, the installation halts with the following messages:…
- How can I automatically change passwords with OpenServer?
You will need to install the "Expect" programming language available from:…
- When I try to print using lp, I get the following error message: lp reports : uprint unable to complete print no space to allocate temp files.
When I try to print using lp, I get the following error message:…
- When I telnet from UnixWare 7.x to OpenServer 5.x, I see this message, "libc: setlocale: LC_MONETARY: no LANG= line in /etc/default/lang."
When I telnet from UnixWare 7.x to OpenServer 5.x, I see the following message:…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.5 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.6?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing