OpenServer 5.0.6 technical articles
714 articles from the Xinuos database that name OpenServer 5.0.6. Showing 351–400 of 714.
- I get error messages during SCO OpenServer 5.0.5 installation with any Compaq Array Controller that has a large Boot Logical volume.
SCO OpenServer 5.0.5 Installation, while having Compaq Array controller as primary for Boot Logical volume sizes greater than 17 GB, will display an error window with the following message d…
- How do I unretire a user in Improved or High Security?
How do I unretire a user in Improved or High Security?…
- How can I install "sysadmsh" onto my OpenServer server?
How can I install "sysadmsh" onto my OpenServer server?…
- When AFPS 3.5.2n starts, the Event Viewer contains the error message "Error 2186: Service is not Responding to Control Function."
When AFPS 3.5.2n starts the Event Viewer contains the error message:…
- Memory leak in dlopen(S) / dlclose(S) in Openserver 5 Development System.
My application that uses dlopen() and dlclose() keeps using more and more memory allowing it to grow in size indefinitely.…
- How can I install OpenServer on a Compaq Proliant which is unable to load the Compaq SmartStart CD?
How can I install OpenServer on a Compaq Proliant which is unable to load the Compaq SmartStart CD?…
- I need to restore my data from a Compaq server running with the Smart Array 3200 (ida) to another Compaq server running with the Smart Array 431 (clad) using BackupEdge.
I need to restore my data from a Compaq server running with the Smart Array 3200 (ida) to another Compaq server running with the Smart Array 431 (clad) using BackupEdge.…
- How can I prevent people from connecting to my SMTP port and sending mail through me or relaying mail by using Sendmail 8.8.x?
You have configured your system to use relaying with Sendmail 8.8.8, but other people can connect to your SMTP port and send mail through you.…
- Creating files on a remote system using remote shell or rcp results in file permissions that are not consistent with the umask settings for that user.
When creating remote files (rcmd,rcp,rsh..) on an OpenServer5 system, files are always created using a umask of 077, despite what the user's umask is configured to be.…
- How do I install the Skunkware version webmin for OpenServer5?
How do I install webmin for OpenServer so that I can manage my OpenServer server from a browser on my desktop.…
- SCO OpenServer5 Kernel is too large to fit on a boot diskette, which causes the creation of emergency boot and root floppies to fail.
SCO OpenServer5 Kernel is too large to fit on a boot diskette, which causes the creation of emergency boot and root floppies to fail.…
- What is the USB Supplement for SCO OpenServer 5.0.6 and where can I get it?
What is the USB Supplement for SCO OpenServer 5.0.6 and where can I get it?…
- What is Release Supplement 5.0.6a and where can I get it?
What is Release Supplement 5.0.6a and where can I get it?…
- What is the Sendmail 8.11.0 Supplement for OpenServer 5.0.6a and where can I get it?
What is the Sendmail 8.11.0 Supplement for OpenServer 5.0.6a and where can I get it?…
- My cursor changes from block to an underline every time I execute the vi program.
My cursor changes from block to an underline every time I execute the vi program.…
- What is SLS OSS636A, the TCP Security Supplement?
Older versions of bootpd and talkd contain potential security vulnerabilities.…
- What is SLS OSS629A, the SCO HTTP Security Supplement?
Older versions of scohttpd contain a potential security vulnerability.…
- How do I use tls709, IP Filter for OpenServer 5.0.x?
Obtain the "tls709", IP Filter package, which is available from the following URL:…
- How can I restrict access to my Openserver 5 system over the network?
I want to restrict network access to my server. This can be done through /etc/hosts.deny and /etc/hosts.allow on Unixware 7, but these files don't exist on Openserver. The hosts.equiv man pa…
- Why does fsck fail after Phase 1 with "BAD STATE # FOR INODE I=XXX?"
Running fsck -ofull, either from the Emergency Boot and Floppies or from single user mode, the following output is seen:…
- What is OSS635a, the Graphical Environment Supplement for OpenServer 5.0.6 + RS506a?
What issues are addressed by OSS635a, the the Graphical Environment Supplement for OpenServer 5.0.6 + RS506a?…
- I get "The custom+ binary (backend) process has died." error message while trying to install SCO Sendmail (ver 8.11.0).
The custom+ binary (backend) process has died.…
- The recommended way to move user accounts from Unixware x to Unixware 7 and OpenServer to Unixware 7.
I am looking for a way to move my user accounts from one operating system or release to another.…
- I get the following error message in the boot option of VDM, when I choose "recreate" to recreate the boot partition of the 2nd drive: "Unable to determine the configuration of the recover division on the root partition"
I get the following error message in the boot option of VDM, when I choose "recreate" to recreate the boot partition of the 2nd drive: "Unable to determine the configuration of the recover d…
- If I change the time zone of my server, how do I ensure the new changes will take effect?
If I change the time zone of my server, how do I ensure the new changes will take effect?…
- What is SSE072C, the buffer overflow security patch for Openserver 5?
Buffer overflows have been found in the following 19 SCO OpenServer 5 utilities:…
- 'cpio' fails to work when running the system off boot/root floppies on OpenServer 5.0.6 with rs506a installed
With rs506a installed on your system, booting the system up from boot/root floppies on Openserver 5.0.6, cpio fails to work. It will fail with:…
- I have installed the Compaq UPS agents but some of the UPS options are grayed out in the Compaq Insight Manager
I have installed the Compaq UPS agents but some of the UPS options are grayed out in the Compaq Insight Manager.…
- During installation of Netscape Communicator 4.7.0f from the SCO OpenServer Supplements CD (March 2001), I am getting "awk" error messages.
During installation of Netscape Communicator 4.7.0f from the SCO OpenServer Supplements CD (March 2001) or from:…
- My server panics with the following error messages "PANIC : ERR : ERROR LOG OVERFLOW" when using Virtual Disk Manager (VDM).
One of the Virtual Disk Manager (VDM) root "pieces" went off line. I booted from the mirrored "root" disk and replaced the faulty drive. When the server was re-booted, VDM re-builds the mirr…
- When compiling and/or running anything with the JDK 117B on OpenServer 5, "... _signalnull() found in existing libs", is displayed.
The following is seen on the screen any time when java or javac are run:…
- SCO OpenServer does not recognize the USB bus on my system with the SCO OpenServer USB Supplement installed.
I am trying to use the Universal Serial Bus (USB) on my Compaq system. I have installed the USB Supplement for SCO OpenServer 5 Release 5.0.6 but the kernel does not see the USB bus at boot …
- I am receiving panics with "PANIC: k_trap kernel mode trap type 0x0000000F" at random intervals during installation.
I am receiving panics with "PANIC: k_trap kernel mode trap type 0x0000000F" at random intervals during installation.…
- What problems are fixed in Release Supplement 506a for SCO OpenServer Release 5.0.6?
I would like to know what bugs have been fixed in Release Supplement RS506a for SCO OpenServer 5.0.6?…
- When I try to add a Vendor Class string with white space in DHCP Manager the window disappears.
I am trying to add Vendor Classes in the DHCP Manager. When prompted for a Vendor Class string I have tried entering the following examples separately:…
- I am unable to fsck my non-root filesystem and re-mount the filesystem after a power failure
When an "fsck -d -ofull" is performed on a non-root filesystem, the fsck hangs and at the point it runs Phase 5 Checking Synchronous Log.…
- How do I add a 3COM 3C589D to SCO OpenServer 5.0.x?
I am having problems configuring and using a PCMCIA 3COM 3C589D card in my OpenServer 5.0.4 laptop.…
- Which is the best compression tool to use?
Which compression tool, supplied by SCO or available from Skunkware, is the best one to use to compress my files?…
- My OpenServer server has panicked with "NOTICE: growreg - Insufficient memory to allocate 1 page - system call failed".
My server has panicked with the following messages:…
- OpenServer, routed does not start by default.
Routing will occur once a value is defined in the GATEWAY= entry of /etc/default/tcp, or the start up of routed is automated by giving the value "/etc/routed" to the ROUTER_DAEMON entry in /…
- AFPS 3.5.2n and 4.0.x are slow with Windows 2000/XP
AFPS 3.5.2 or 4.0.x do not claim to be Windows 2000/XP compatible.…
- When using Oracle, what does the ORA-00600 error mean?
What does the following error in the Oracle log file(s) mean? (exact syntax may vary):…
- Installation of Tarantella Enterprise 3 on SCO OpenServer 5.0.6 fails.
Setting up server beans... Starting Tarantella server (version 3.01.905). Please wait... dynamic linker: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../bin/i386/green_threads/jre: OpenServer b…
- An in-place upgrade from OpenServer 5.0.4 to 5.0.5 and then on to 5.0.6 fails.
At some point I did an in-place upgrade from SCO OpenServer 5.0.4 to OpenServer 5.0.5. Now when I do an in-place upgrade to SCO OpenServer 5.0.6 on the same machine, it fails. First I see th…
- After running mkdev apc, the APC UPS doesn't shut down my system properly.
After configuring my system with mkdev apc and rebooting I make sure that the ssd daemon is running. Then, as a test, I unplug the UPS AC power cable. I configured the utility to wait 7 minu…
- How do I print to a Lexmark printer server using SCO OpenServer?
What do I need to configure to print to a Lexmark Print Server using SCO OpenServer?…
- My server panics with an NMI (Non Maskable Interrupt) Error Message.
My server panics with an NMI Interrupt Error Message, for example:…
- How can I see what files are in use with AFPS and how can I increase performance?
I want to see what files are open and, using resource on my AFPS server, increase performance for my clients.…
- After running mkdev apc, my system automatically shuts down upon entering multiuser mode.
I have installed an APC Smart-UPS to my system using the correct serial cable and a local serial port. I ran mkdev apc and now every time I get booted into multiuser mode the system shuts do…
- What are the tools available to run diagnostics on my DNS configuration?
It takes a long time to connect to my server using the DNS name.…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.5 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.6?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing