OpenServer 5.0.6 technical articles
714 articles from the Xinuos database that name OpenServer 5.0.6. Showing 551–600 of 714.
- OpenServer 5, How do I automate netconfig(ADM) to add an ethernet card on a TCP chain?
How do I automate netconfig(ADM) to add an ethernet card on a tcp chain?…
- Configure telnetd to close connection when client connection no longer exists.
Commands such as who(C), finger(C), and ps(C) may show established telnet sessions when the client end of the TCP connection no longer exists, for example, when the client computer crashes, …
- Routes are mysteriously showing up in my routing tables.
My system is not running routed, gated, or ird'd, yet my netstat -rn shows new routes. How are they getting there? The netstat -rn output also shows a "D" in the flags section for these rout…
- Installing a network card fails with message "/usr/lib/netconfig/init/net1 net1--sco_tcp lli Y does not exist".
I am attempting to install a network card and it is failing with the following message:…
- I installed a network interface card (NIC); now I'm having networking problems.
(1) The NIC is configured successfully but doesn't respond or gives errors during reboot;…
- How can I configure sendmail to deliver mail through UUCP exclusively and not use SMTP at all?
I want to configure sendmail to deliver mail exclusively through UUCP and not use SMTP.…
- How can I get sendmail to recognize a new hostname?
After changing hostname with uname -S, the old server name still shows up in the "From:" field of outgoing email. How can I get Sendmail to recognize a new hostname?…
- How can I bypass the filter on a non-SCO lpd server using lp(C)?
I want to print a file from an SCO system to a non-SCO lpd server and I want to flag to the lpd server not to filter the file before printing it. BSD versions of lpr provide a -l (literal) o…
- How do I configure sendmail to ignore case-sensitivity when looking up local usernames in mail addresses?
How do I configure SendMail to ignore case-sensitivity when looking up local usernames in mail addresses?…
- What IP addresses can I use for an internal (private) network?
I am building an internal, or private, network and would like to use addresses that are not currently used on the Internet.…
- How to turn on ftp logging.
In the file /etc/ftpaccess, uncomment the following line:…
- I get a "/etc/slink: Function "boot_net0" redefined" error during kernel relink.
While relinking the kernel after removing or reconfiguring my network card, I see this slink error:…
- Intel EtherExpress Pro/100 or Pro/100B NIC isn't working.
It's possible that the wrong driver is being used, or the driver's speed is set incorrectly.…
- rcp(TC) and rcmd(TC) fail with stty related error messages when using the csh.
When I use the rcp(TC) or rcmd(TC) commands to interface with a remote machine, and the remote login is running a csh, the command fails and the following message is displayed:…
- I reconfigured sendmail not to use a smarthost; now mail isn't being delivered.
There may be messages generated in /usr/adm/syslog that look similar to:…
- How can I set ipforwarding and ipsendredirects from the command line?
To set your system up as a gateway, take your system into System Maintenance mode and issue the commands:…
- Is it possible to configure multiple default routes in OpenServer 5?
To provide increased resilience to failure, a site has been configured with multiple connections via routers to an external network.…
- How do I change from MMDF to sendmail in SCO OpenServer Release 5?
In order to switch mail packages, you must first remove the mail package that is currently installed on your system and install the new mail package from your installation media. This can be…
- Which networking utilities consume user licenses in SCO OpenServer and Unixware?
The table below details example commands, whether that command invokes login(M), and whether the login(M) command consumes user licenses on that command's behalf.…
- Get "copy file too large" error when initiating remote print job.
I received the error message "copy file too large" when I initiated a remote print job from the client.…
- How do I set up a primary nameserver and nameserver clients?
What files need to be configured to set up a Nameserver?…
- OSR5:Remote backups over an SCO TCP/IP network using cpio and rcmd.
(A) Backing up remote system to a tape drive on the local system.…
- What are the recommended patches for retired operating systems?
I have a retired product and wish to check the essential patches required for this operating system.…
- Slow parallel printing
I have a very slow parallel printer. Is this normal for SCO XENIX, or is there something I can do about it?…
- Df(C) and mount(ADM) report erroneous information.
To recreate the mount table from scratch, issue the following command:…
- Why did my UNIX kernel "panic"?
System panics can be caused by hardware or software problems. The following procedure can be used to diagnose the cause of some system panics.…
- How to disable Network Information Service (NIS) on OpenServer 5.
I have a system that was set up to be an NIS client or server and now I want to prevent NIS from running on it.…
- SCO OpenServer installation bootstring options.
SCO OpenServer 5.0.4, 5.0.5 or 5.0.6, 5.0.7 is not installing properly.…
- How do I create customized system dump images on demand?
a) Create a system dump image on the running system, without disrupting the normal operation of the system, and save this image to a file, automatically incorporating within the file the ker…
- In OpenServer 5.0.x, I don't have enough swap space to complete a panic dump.
Moving the dump device to a different drive or partition requires two steps:…
- How do I configure my 5.0.x server as a gateway?
Before following the steps for configuring the server as a gateway, draw a picture of your network like the one above, filling in the appropriate IP addresses for your setup. With or without…
- I get the message "prc_sync: script (P86sendmail) failed to complete 120 seconds."
I am getting the following message when trying to boot to multiuser mode:…
- Outgoing Morning Star PPP connection fails to connect to ISP using ISA-64 dialer.
I am trying to connect to a remote site via Morning Star PPP using an ISDN modem. I am using the ISA-64 or ISA-56 dialer from the /usr/lib/mstppp/Dialers file. Both cu(C) and uutry(ADM) work…
- How do I exclude root and other users from the idleout command?
The System Administrator will need to edit /usr/bin/idleout to exclude any users that are not to be logged out when idleout expires.…
- After configuring a secure web server, the error "prc_sync: Script (S90atlas) failed to complete in 120 seconds" appears at bootup.
After configuring a secure web server, the following message appears during bootup:…
- How can I get the sendmail local delivery agent to not put ^A^A^A^A as a mailbox message separator?
How can I get the sendmail local delivery agent to not put ^A^A^A^A as a mailbox message separator?…
- What are the filesystem types that can be used in SCO OpenServer 5?
What are the filesystem types and the corresponding limitation sizes that can be used in SCO OpenServer 5?…
- During bootup, I get "prc_sync: script failed to complete in 120 seconds".
During bootup, I see an error message similar to the following:…
- Problems with MultiTech dialers in OpenServer 5.0.X.
None of the MultiTech dialers in /usr/lib/uucp/default work with my modem.…
- Techniques to help identify the failing function of a kernel panic.
How can I use the crash(ADM) utility to analyze a dump image from a panic and identify the failing function along with the calling process?…
- I'm unable to configure a 2-way login UUCP connection in SCO OpenServer 5.0.2, 5.0.4, and 5.0.5.
After following the procedure called "Connecting two local systems using a direct wire" in the UUCP chapter of the System Administration Guide to configure a 2-way login direct serial connec…
- Organizing UNIX filesystems for easy migration.
I want to organize my filesystems so that I can easily port user files to a new operating system on a new platform, or back them up and restore them after installing a new operating system o…
- OpenServer 5, Virtual Disk Manager (VDM) reports that a disk has bad parity, is offline, or disabled.
vdiskX: is being taken offline vdiskX: piece Y is being taken out of service vdiskX: parity out of date vdiskX: failed to read timestamp…
- What commands are available when running an SMTP or POP session interactively?
I need to connect to port 25 (SMTP) or 110 (POP) interactively. That is, I am troubleshooting a mail problem and I need to know what commands are available to me.…
- How to change your server's IP address, netmask, or broadcast?
I need to change the IP address, netmask, or broadcast of my SCO OpenServer 5.0.x server. How do I do this and what caveats should I be aware of?…
- Configuring the ip address of HP Jetdirect printer or port-server from SCO UNIX.
2. Determine the name of your network interface (usually net0) by typing:…
- My desktop window won't open when I double click on the icon under OpenServer 5.
When I double click on the UNIX icon (or other desktop icons) the window flashes on the desktop and then immediately disappears.…
- How to use the cwtmp utility to clear stale entries from utmp and related files.
It is possible that /etc/utmp and related files have stale entries. Output from "who" and related commands is based on these files. The stale entries may be due to corruption in files that a…
- How to make the fsck command check all filesystems on your machine.
I want to run fsck(ADM) on all filesystems on my machine. Can I do this without typing a separate command for each filesystem?…
- Sendmail configuration changes made via the Internet Manager are lost when scoadmin -> sendmail is used to make subsequent changes.
I updated my sendmail configuration using the Internet Manager, then later used scoadmin -> sendmail (or mkdev cf) to make more changes, and my previous changes (made through the Internet Ma…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.5 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.6?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing