OpenServer 5.0.5 technical articles
888 articles from the Xinuos database that name OpenServer 5.0.5. Showing 451–500 of 888.
- Morning Star PPP - My default route doesn't get properly updated after establishing an outbound PPP session using dynamic IP addresses.
There is an error within the /usr/lib/mstppp/exec.dialout script which can cause the script to not properly add a dynamically assigned address.…
- SCOadmin Printer Manager fails while adding a remote NetWare printer.
I am adding a remote NetWare printer to my SCO OpenServer 5.0.5 system, which has Release Supplement 505A (rs505a) and Support Level Supplement (SLS) OSS497B, the Core OS Supplement, install…
- SCOadmin Printer Manager fails while retrieving a list of remote NetWare printers.
SCOadmin Printer Manager fails on SCO OpenServer 5.0.5 with Release Supplement 505A (rs505a) and Support Level Supplement (SLS) OSS497B, the Core OS Supplement, installed, while retrieving t…
- SCO OpenServer 5.0.5 install hangs at "Reading from Install Source:" message.
I am trying to install SCO OpenServer Release 5.0.5. The installation proceeds without problems until I get to the point where I enter the root password and select "OK" to continue the insta…
- What problems are addressed by SLS OSS602B, the Virtual Disk Manager Supplement for SCO OpenServer Release 5.0.x?
Virtual Disk Manager hangs the system during shutdown at "The system is down" message.…
- Appending with tar results in an archive with directory checksum errors.
Appending to an archive with tar option 'r' or 'u' results in an archive with directory checksum errors. For example:…
- "There is no /etc/default/boot file present in the boot filesystem" reported when upgrading from OpenServer 5.0.2 to 5.0.5.
While attempting an in-place upgrade from SCO OpenServer 5.0.2 to SCO OpenServer 5.0.5, the upgrade halts with the following error message just after entering the license details:…
- How can I generate and save a debug logfile for an SCO OpenServer 5 installation or upgrade?
First, if you want to save the debug log, you will require a floppy disk formatted with an EAFS filesystem on it.…
- I get the message "K_trap - unexpected alignment fault in system mode" or a panic lock timeout occurs.
When configuring a Digi async multiport board, a panic lock timeout occurs, or this message is seen scrolling on the console:…
- After installing SLS OSS497B, regular users get an error when running lpstat(C).
After installing Support Level Supplement (SLS) OSS497B, the Core OS Supplement for SCO OpenServer 5.0.5, regular users get the following error message when running the lpstat(C) command:…
- Using pppattach(ADMN) to bring up my outgoing PPP link, I get the error, "pppattach: can't connect to pppd" and the link does not come up.
Using pppattach(ADMN) to bring up my outgoing PPP link, I get the following error:…
- Using pppattach(ADMN) to bring up my outgoing PPP link, I don't get any errors but the modem never dials. /usr/adm/syslog shows the error "dial failure".
If the command immediately returns to a prompt, but the modem never dials, check /usr/adm/syslog for an error that looks something like this:…
- Using pppattach(ADMN) to bring up my outgoing PPP link, I get a "fail" error from pppattach.
If the command immediately returns an error, "pppattach test1: fail", there is a configuration problem. In this situation, the following error gets logged in /usr/adm/syslog at the same time…
- TLS704 - Statically linked utilities and versions of libc.so.1 for OpenServer 5.
Where can I obtain a set of statically linked utilities that will run when my libc.so.1 file is missing or becomes corrupted? Also, where can I obtain a replacement copy of libc.so.1 for my …
- I can't copy a system dump image bigger than 2GB on my OpenServer 5 system.
There may be a system dump memory image in the swap device. Do you want to save a copy of it? (y/n)…
- How to recover from a lost or corrupted /usr/lib/libc.so.1 on OpenServer 5.
- Not being able to run commands; attempting to execute commands such as ls(C), mv(C), cp(C), etc., immediately results in the message "Killed" from the shell instead.…
- uname(C) does not report new user count after user license installed.
This can be caused by entering a letter "i", or a letter "l", instead of a number "1" in the part of the license data that specifies the user count. For example, consider the following licen…
- When configuring a Netscape Proxy Server filter, I get the error "conf_init: [NSACL1900] error opening file,..."
When configuring or editing a filter file within the Netscape Proxy Server "URL Filter Access Restriction" screen, I get the following error after clicking "OK" and then "Save and Apply":…
- How do I gather a lot of important information about my OpenServer 5 system, for troubleshooting purposes, with a single command?
(1) It performs a non-disruptive, system dump of live memory if the shell variable CAPTURE_DUMP is set to the value "Y"; CAPTURE_DUMP is set to "N" by default.…
- Can I enter the century when changing the system date with asktime(ADM)?
This problem is fixed in SCO OpenServer Release 5.0.6.…
- Mail fails with "Sendmail: rejecting connections on port 25 load average: 18".
Sendmail fails to send or deliver mail and popper fails to retrieve mail for POP clients. SMTP connections to port 25 are refused. The file /usr/adm/syslog shows:…
- After upgrading from a system running BIND 4.9 to one running BIND 8.1, the complete zone will not load.
After upgrading my system from one running BIND 4.9 to a system running BIND 8.1, the complete zone will not load.…
- How do I use LUN specification to configure devices off my external SCSI raid controller?
Some external SCSI RAID controllers require that logical drive groups be specified by a logical unit number (LUN). How do I enable LUN support in the OS and for my host adapter?…
- What is SLS OSS604A, the BTLD Installation Supplement for SCO OpenServer 5.0.5?
Support Level Supplement (SLS) OSS604A, the BTLD Installation Supplement for SCO OpenServer 5.0.5, corrects this problem. For additional workarounds, see ta109935.…
- Where are the answers to the questions asked during Initial System Load (ISL) stored?
Where are my responses to the questions asked during the Initial System Load (ISL) stored?…
- Multicast packets sent from SCO OpenServer 5 will not go beyond my local subnet.
Multicast packets sent from SCO OpenServer 5 will not go beyond my local subnet.…
- PPP link from Windows client will not succeed without bringing up Terminal Window and manually logging in.
When I configure a Dial-up Network (DUN) connection from a Windows client to an SCO PPP, MSTPPP or UnixWare 7 server, I am not automatically connected. I must select "bring up terminal windo…
- Can I use custom(ADM) from the command line to non-interactively install year 2000 patches on my OpenServer 5 system?
I want to install Support Level Supplement (SLS) OSS600A or OSS601A non-interactively on my SCO OpenServer 5 system. Can I use custom(ADM) from the command line to do this?…
- I've installed a non-standard shell, but now I can't log in with scologin.
After installing a non-standard shell such as BASH, scologin does not allow me to log in.…
- My Hewlett Packard DAT autoloader does not work with OpenServer 5.0.5.
I have installed a Hewlett Packard DAT autoloader connected to an Adaptec SCSI host adapter using 'mkdev tape' and 'mkdev juke'. The configuration seems correct, but the device does not resp…
- SCO OpenServer fails to recognize the CD-ROM during installation on a ProLiant 5500.
SCO OpenServer Host and SCO OpenServer Enterprise System Release 5.0.5 fails to recognize any combination of EIDE CD-ROM settings (primary/secondary controller, master/slave device) when spe…
- Where can I find some legacy graphics adapter drivers for SCO OpenServer 5?
There is a Technical Library Supplement (TLS) called TLS 611, Legacy XDrivers for SCO OpenServer 5.0.x, which contains a limited collection of legacy graphics drivers for SCO OpenServer 5.0.…
- PPP CHAP authentication fails if "secret" field contains "#" character.
The "#" is treated as a comment, and the rest of the line is not sent.…
- How can I debug my PPP dynamic or manual outbound dialup connection?
When I try to connect with another PPP endpoint using a modem, I can't tell if my modem is establishing a connection.…
- I see errors such as "popper: unable to get canonical name of client, err=XXX" in my syslog file.
Although the error code can vary slightly, the cause of the problem is generally the same:…
- I get "password incorrect" when trying to connect to a VisionFS 3.0 server using VisionFS encrypted passwords on OpenServer 5 or SPARC Solaris 2.4.x.
When trying to connect to an SCO VisionFS 3.0 server running on SCO OpenServer Enterprise System 5.0.4, 5.0.5 or Sun SPARC Solaris 2.4.x using VisionFS encrypted passwords, I get the error m…
- Morning Star PPP dynamic outbound connection does not set siofifo correctly.
Once you make the change, the script should run properly.…
- OpenServer 5.0.5 reports "dynamic linker: symbol not found: dlopen" while running a binary that uses dynamic libraries.
To work around the problem, edit /usr/include/dlfcn.h, and add the following lines:…
- How to configure DHCP on SCO OpenServer 6/5 and UnixWare7?
How do I configure Dynamic Host Configuration Protocol (DHCP) on SCO OpenServer 5 and UnixWare7?…
- I can't clear a lock on a user's account that was locked when they exceeded the maximum number of login attempts using the command 'passwd -u <username>'.
it does not remove the lock because it isn't an administrative lock. I know I can issue the command:…
- What does Support Level Supplement (SLS) OSS425D, the SCO OpenServer Crypt Supplement, contain?
What is contained in Support Level Supplement (SLS) OSS425D, the SCO OpenServer Crypt Supplement?…
- What Vision product comes supplied as part of my SCO Operating System?
I've just purchased SCO OpenServer Enterprise System Release 5.0.4 or 5.0.5 or 5.0.6 or UnixWare Business, DataCenter or Enterprise Edition 7.0.0, 7.0.1, 7.1.0 or 7.1.1. Which of the SCO Vis…
- How to configure OpenServer running scologin to use a remote fontserver.
To accomplish this, you must have the fontserver configured and running on the remote host and be using scologin on the client. The following steps outline the process:…
- How do I install Release Supplement RS505A in non-interactive mode from the command line?
How do I install Release Supplement RS505A in non-interactive mode from the command line?…
- Where can I get the full upgrade and/or the latest version of VisionFS for SCO OpenServer and UnixWare operating Systems?
SCO VisionFS came supplied as part of my SCO Operating System. How can I upgrade to SCO VisionFS 3.1, the latest release of VisionFS? Is it available for downloading ?…
- My process table output shows /bin/login baduser.
What does it mean when my process table output (ps) shows a process called /bin/login baduser?…
- How to install VisionFS 3.0 from the Vision2K CD-ROM on SCO OpenServer 5 and UnixWare 7 when the Optional Services CD is not available.
I have tried to install VisionFS 3.0 from the Vision2K CD-ROM using the Software Manager, but I do not see the selection for VisionFS 3.0.…
- Only the first one or two jobs queued for a UUCP dialup printer are printed.
After configuring a remote UUCP dialup printer (as per Chapter 4 of the "System Administrator's Guide"), only one or two print jobs are printed. Additional jobs remain in the queue without b…
- My scoterm window under SCO OpenServer 5.0.5 disappears if I try to resize it.
Release Supplement 505A (rs505a) for SCO OpenServer Release 5.0.5 is already installed on the system.…
- Unsupported network card on OpenServer causes VisionFS to return the error "Cannot connect to License Server" when adding a Vision97 license number.
When I try to license SCO VisionFS 1.2 on SCO OpenServer 5.0.4 or SCO VisionFS 2.01 on SCO OpenServer 5.0.5, I get the error message "Cannot connect to license server".…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.5?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing