OpenServer 5.0.5 technical articles
888 articles from the Xinuos database that name OpenServer 5.0.5. Showing 251–300 of 888.
- Why does fsck fail after Phase 1 with "BAD STATE # FOR INODE I=XXX?"
Running fsck -ofull, either from the Emergency Boot and Floppies or from single user mode, the following output is seen:…
- What is OSS634a, the Graphical Environment Supplement for OpenServer 5.0.5 + RS505a?
What issues are addressed by OSS634a, the the Graphical Environment Supplement for OpenServer 5.0.5 + RS505a?…
- "No user licenses were found on this machine" message appears at boot time on an SCO OpenServer 5.0.5 system with an Evaluation License installed.
I have installed SCO OpenServer Release 5.0.5 onto my system successfully using an evaluation license. I have rebooted the system and just before the SINGLE USER MODE prompt, I get this mess…
- The recommended way to move user accounts from Unixware x to Unixware 7 and OpenServer to Unixware 7.
I am looking for a way to move my user accounts from one operating system or release to another.…
- I get the following error message in the boot option of VDM, when I choose "recreate" to recreate the boot partition of the 2nd drive: "Unable to determine the configuration of the recover division on the root partition"
I get the following error message in the boot option of VDM, when I choose "recreate" to recreate the boot partition of the 2nd drive: "Unable to determine the configuration of the recover d…
- If I change the time zone of my server, how do I ensure the new changes will take effect?
If I change the time zone of my server, how do I ensure the new changes will take effect?…
- What is SSE072C, the buffer overflow security patch for Openserver 5?
Buffer overflows have been found in the following 19 SCO OpenServer 5 utilities:…
- I have installed the Compaq UPS agents but some of the UPS options are grayed out in the Compaq Insight Manager
I have installed the Compaq UPS agents but some of the UPS options are grayed out in the Compaq Insight Manager.…
- My server panics with the following error messages "PANIC : ERR : ERROR LOG OVERFLOW" when using Virtual Disk Manager (VDM).
One of the Virtual Disk Manager (VDM) root "pieces" went off line. I booted from the mirrored "root" disk and replaced the faulty drive. When the server was re-booted, VDM re-builds the mirr…
- When compiling and/or running anything with the JDK 117B on OpenServer 5, "... _signalnull() found in existing libs", is displayed.
The following is seen on the screen any time when java or javac are run:…
- I am receiving panics with "PANIC: k_trap kernel mode trap type 0x0000000F" at random intervals during installation.
I am receiving panics with "PANIC: k_trap kernel mode trap type 0x0000000F" at random intervals during installation.…
- When I try to add a Vendor Class string with white space in DHCP Manager the window disappears.
I am trying to add Vendor Classes in the DHCP Manager. When prompted for a Vendor Class string I have tried entering the following examples separately:…
- I am unable to fsck my non-root filesystem and re-mount the filesystem after a power failure
When an "fsck -d -ofull" is performed on a non-root filesystem, the fsck hangs and at the point it runs Phase 5 Checking Synchronous Log.…
- How do I add a 3COM 3C589D to SCO OpenServer 5.0.x?
I am having problems configuring and using a PCMCIA 3COM 3C589D card in my OpenServer 5.0.4 laptop.…
- Which is the best compression tool to use?
Which compression tool, supplied by SCO or available from Skunkware, is the best one to use to compress my files?…
- My OpenServer server has panicked with "NOTICE: growreg - Insufficient memory to allocate 1 page - system call failed".
My server has panicked with the following messages:…
- OpenServer, routed does not start by default.
Routing will occur once a value is defined in the GATEWAY= entry of /etc/default/tcp, or the start up of routed is automated by giving the value "/etc/routed" to the ROUTER_DAEMON entry in /…
- AFPS 3.5.2n and 4.0.x are slow with Windows 2000/XP
AFPS 3.5.2 or 4.0.x do not claim to be Windows 2000/XP compatible.…
- When using Oracle, what does the ORA-00600 error mean?
What does the following error in the Oracle log file(s) mean? (exact syntax may vary):…
- Installation of Tarantella Enterprise 3 on SCO OpenServer 5.0.6 fails.
Setting up server beans... Starting Tarantella server (version 3.01.905). Please wait... dynamic linker: /opt/tarantella/bin/jre.i3sc_3.01.905/bin/../bin/i386/green_threads/jre: OpenServer b…
- An in-place upgrade from OpenServer 5.0.4 to 5.0.5 and then on to 5.0.6 fails.
At some point I did an in-place upgrade from SCO OpenServer 5.0.4 to OpenServer 5.0.5. Now when I do an in-place upgrade to SCO OpenServer 5.0.6 on the same machine, it fails. First I see th…
- After running mkdev apc, the APC UPS doesn't shut down my system properly.
After configuring my system with mkdev apc and rebooting I make sure that the ssd daemon is running. Then, as a test, I unplug the UPS AC power cable. I configured the utility to wait 7 minu…
- How do I print to a Lexmark printer server using SCO OpenServer?
What do I need to configure to print to a Lexmark Print Server using SCO OpenServer?…
- My server panics with an NMI (Non Maskable Interrupt) Error Message.
My server panics with an NMI Interrupt Error Message, for example:…
- I can't see the root filesystem as being mounted when I use the 'mount' command.
The root filesystem does not show as mounted in the mount table, or when using the 'mount' or 'df -v' commands. Even in single user mode the root filesystem does not show as being mounted.…
- How can I see what files are in use with AFPS and how can I increase performance?
I want to see what files are open and, using resource on my AFPS server, increase performance for my clients.…
- After running mkdev apc, my system automatically shuts down upon entering multiuser mode.
I have installed an APC Smart-UPS to my system using the correct serial cable and a local serial port. I ran mkdev apc and now every time I get booted into multiuser mode the system shuts do…
- What are the tools available to run diagnostics on my DNS configuration?
It takes a long time to connect to my server using the DNS name.…
- JDK 1.2.2 on OpenServer 5, Calendar class fails on certain time zones.
The Calendar class fails to return the correct information with certain time zone settings. Instead, the time zone will be represented as:…
- How do I set my disk buffering for SCO OpenServer 5 to the optimum values?
I have identified a disk buffering bottleneck using sar. How do I increase disk buffering for SCO OpenServer 5?…
- How do I install DOS 6 or 7 from floppy disk on SCO OpenServer 5?
How do I install DOS 6 or 7 from floppy disk on SCO OpenServer 5?…
- When I try to run "net" commands to add users, I get Error 53 messages.
I want to run the net commands from the Unix prompt, but it complains with Error 53 Permission Denied.…
- OpenServer 5, The -M "corefile" and -N "system" options don't work for the netstat(TC) command.
This has been reported to SCO Engineering.…
- I upgraded from OpenServer 5.0.x to OpenServer 5.0.6 and my files from /usr/local/ are missing.
I upgraded from SCO OpenServer 5.0.x to SCO OpenServer 5.0.6 and the installation created empty directories (bin and lib) under /usr/local.…
- Why can't I add more than five trusts to my AFPS domain?
When I add a sixth trust within my AFPS domain all my network connectivity dies for any new server that is started after I created the trust.…
- While in single user mode, custom, scoadmin and other utilities fail on SCO OpenServer 5.0.6.
Sorry, I need to know a more specific terminal type than "unknown". Fatal error: (vTcl interp) Failed reading Receive Msg length - Unknown error Error Information logged to: /tmp/tclerror.16…
- How do I install the HP (Compaq) Insight Manager on OpenServer5?
How do I install all the necessary components for the HP (Compaq) Insight Manager?…
- Local MMDF email is not being delivered locally and is waiting in queue.
Local MMDF email is not delivered locally. It is sitting in the MMDF local mail queue waiting for delivery. You can see the problem if you try to force the mail manually with the command:…
- Some of my users can log on to AFPS and others can't.
Some users aren't being authenticated when they try to log on to an AFPS server.…
- How do I change the admin password for the Netscape FastTrack server on SCO OpenServer?
I need to change the admin password for the Netscape FastTrack server without logging into the admin server:…
- MMDF mail sent to SCO OpenServer 5.0.5 results in return mail with rmail errors.
Using MMDF over the UUCP channel to send mail to other systems running SCO OpenServer 5.0.5 results in the sender being sent a return message that may contain the following errors:…
- I get non-relocatable symbol errors when compiling on a system with SSE069C installed.
I am compiling a program that requires X11 libraries on an SCO OpenServer Release 5.0.5 system with SSE069c installed and I get a number of error messages similar to the following:…
- How do I set up two system serial consoles for remote access on SCO OpenServer 5?
How do I set up two system serial consoles for remote access, in case of system panics, or to be able to administer two machines from one console?…
- What memory checking tools are built into UnixWare 7 and SCO OpenServer 5?
What memory checking tools are built into UnixWare 7 and SCO OpenServer 5?…
- What version of the SCO OpenServer development system ships with each release of SCO OpenServer 5?
I would like to know what version of the SCO OpenServer development system ships with each SCO OpenServer operating system.…
- It is taking about 30 seconds to process incoming remote print jobs on OpenServer 5.
After sending a remote print job to an SCO OpenServer 5.0.5 or later system, I've noticed that the job stays in the OpenServer print queue for at least 30 seconds before it starts printing. …
- On Openserver 5.0.5, canceling out of a PPP configuration causes the GUI SCOAdmin Network Configuration Manager to hang.
From the graphical desktop, if you choose:…
- Getting started with Network Address Translation (NAT) on OpenServer 5.
Getting started with Network Address Translation on SCO OpenServer 5.…
- SCO OpenServer 5, malloc(S) can cause core dumps when passed very large values, or negative values.
This has been reported to SCO Engineering and has been fixed for the next SCO OpenServer release.…
- SCO OpenServer 5, Under rare circumstances, cron can dump core.
Under rare circumstances, SCO OpenServer 5 cron can dump core.…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.5?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing