OpenServer 6.0.0 technical articles
591 articles from the Xinuos database that name OpenServer 6.0.0. Showing 251–300 of 591.
- What is Support Level Supplement (SLS) OSS707B, the OpenServer 6 Platform Support Update?
What problems are fixed by Support Level Supplement (SLS) OSS707B, the OpenServer 6 Platform Support Update?…
- What is Support Level Supplement (SLS) OSS707A, the OpenServer 6 Platform Support Update?
What problems are fixed by Support Level Supplement (SLS) OSS707A, the OpenServer 6 Platform Support Update?…
- SCO OpenServer Release 6.0.0 Maintenance Pack 3 Release and Installation Notes
SCO OpenServer Release 6.0.0 Maintenance Pack 3 Release and Installation Notes…
- Timezone not changed when I logout and log back into my OpenServer system.
I am using the System Time Manager to change the timezone on my server. When I change the timezone in the manager I am told:…
- I cannot access a USB floppy drive to load an HBA driver during system installation.
The server I am installing on does not ship with a floppy drive as part of the configuration. I need to install an additional HBA driver during system installation, but my external USB flopp…
- NOTICE: msgcnt 1: vxfs: mesg 001: vx_nospace - /dev/root file system > full (1 block extent)
When I boot my OpenServer 6.0.0 system I see the message:…
- How can I configure Mozilla to use a SOCKS 5 Proxy on my local SCO Unix system?
I have configured a SOCKS 5 proxy using Dynamic Port Forwarding on my local SCO Unix system. How can I direct Mozilla to use this SOCKS 5 proxy?…
- When I run racoon(ADM) the process terminates immediately
I am trying to configure my system to use racoon(ADM) to manage keys and certificates for my IPsec configuration. If I start racoon from the command line it terminates almost immediately.…
- How can I setup Dynamic Port Forwarding to my SCO Unix Server?
I would like to setup Dynamic Port Forwarding to my SCO Unix server. How can I do this?…
- dtype(C) does not recognise tapes with cpio(C) archives on OpenServer 6.0.0
I have a tape with a cpio(C) archive on it. If I put the tape into the tape drive and, as root, enter:…
- How to install, configure and launch Merge 5.3.26c?
In this example, we will use v5.3.26c from the UnixWare 7.1.4 Media Kit CD3.…
- How to setup and configure a HP StorageWorks Ultrium LTO-2 448, LTO-3 920 and LTO-4 1760 / 1840 SAS Tape Drive connected to LSI SAS3800X SAS controller on SCO OpenServer 5.0.7 / OpenServer 6.0.0 & UnixWare 7.1.4?
How to setup and configure a HP StorageWorks LTO Ultrium LTO-2 448 SAS Tape Drive connected to LSI SAS3800X SAS controller on SCO OpenServer 5.0.7 / OpenServer 6.0.0 & Unixware 7.1.4?…
- OSR6:integrity reports incorrect permissions
Our documentation suggests using the integrity command to check the system:…
- Will SCO OpenServer 6.0.0 and UnixWare 7.1.4 work with IBM IBM System Storage DS4700 Express?
Will SCO OpenServer 6.0.0 and UnixWare 7.1.4 work (Connect) with IBM System Storage DS4700 Express?…
- The OS does not detect my hard drive or CD-ROM/DVD-ROM when I try to install the system.
I am trying to install the operating system but my hard drive or ATAPI device is not detected. This happens with either an IDE hard drive or ATAPI device (e.g. DVD or CD-ROM drive) or a SATA…
- What driver do I need for my HP SCSI, SAS, or Fibre Channel storage controller?
I need to find the correct driver for my HP (Hewlett Packard) SCSI, SAS, or Fibre Channel storage controller, and I need to know where HP recommends I obtain the driver.…
- Where can I obtain the driver for my IBM ServeRAID 8i, 8k, 8k-l, or 8s SAS controller?
The IBM ServeRAID Serial Attached SCSI (SAS) controllers known as the ServeRAID 8i, ServeRAID 8k, ServeRAID 8k-l, and ServeRAID 8s, require an updated version of the Adaptec 'aacraid' driver…
- How can I improve security on my SCO Unix Server?
What steps can be taken to improve security on my SCO Unix server?…
- I get "Fatal Error: A failure occurred while trying to make filesystems on your hard disk" when installing OpenServer 6.0.0
I am installing OpenServer 6.0.0 on a large physical or logical disk and I am getting the error:…
- What implementation of PPP is shipped with OpenServer 6.0.0 and how can I configure it?
OpenServer 5.0.x shipped with SCO PPP and Morning Star PPP and you could configure SCO PPP using the Network Configuration Manager (netconfig) Graphical User Interface(GUI). What version of …
- I get the error "volcopy: cannot access /etc/log/filesave.log" when trying to copy a filesystem.
I get the error "volcopy: cannot access /etc/log/filesave.log" when trying to copy a filesystem.…
- volcopy(ADM) fails to copy vxfs filesystems on OpenServer 6.0.0
If I try to use volcopy(ADM) to make a copy of a vxfs filesystem the command reports that 0 blocks have been copied to the destination fileysystem.…
- The nd(ADM)man page says that nd is started by /etc/rc2.d/S35dlpi
Configured network adapter drivers will start automatically at system startup time if /etc/nd is linked to /etc/rc2.d/S35dlpi.…
- How do I update my TimeZone file for the New Zealand DayLight Changes?
How do I make my SCO Unix server comply to the New Zealand Daylight TimeZone changes as highlighted in the following document?…
- What Host Bus Adapter (HBA) Drivers are included with the OpenServer 6.0.0 Media?
What HBA drivers are included by default with the OpenServer 6.0.0 installation Media?…
- Where can I find which COBOL runtime or compiler are supported under SCO Unix
Where can I find which COBOL runtime or compiler are supported under SCO Unix?…
- How can I get a MultiTech MT5634ZPX-PCI V.92 Internal PCI Modem to work with SCO OpenServer 6.0.0?
How can I get a MultiTech MT5634ZPX-PCI V.92 Internal PCI Modem to work with SCO OpenServer 6.0.0?…
- How do I configure RSA Authentication between two SCO Unix systems?
I would like to use RSA Authentication when logging in from one SCO Unix server to another. How can I do this?…
- How to configure a MultiTech MT5634MU USB Modem under SCO OpenServer 6.0.0 & UnixWare 7.1.4?
How can I configure a MultiTech MT5634MU MultiMobile USB modem or a MT5634ZBA V.92 USB Modem under SCO OpenServer 6.0.0 & UnixWare 7.1.4?…
- Creation of UW714 or OSR6 filesystems that are above 150 GB is taking too long during the installation on Adaptec SAS HostRaid controllers.
I have a Server with Adaptec ASC-44300 4 port SAS HostRaid controller and want to install SCO UnixWare 7.1.4 or OpenServer 6.0.0.…
- How to configure a MultiTech MT5656ZDX V.92 (or MT5656ZDXV) Serial Modem under SCO OpenServer 6.0.0, 5.0.7 & UnixWare 7.1.4?
I have a MultiTech MT5656ZDX V.92 Serial Modem.…
- How to configure and use ODM Raid-5 under SCO OpenServer 6?
How can I configure and administrate ODM under SCO OpenServer 6.0.0 for Raid-5 only?…
- How to configure and use ODM for disk mirroring Raid 1 under SCO OpenServer 6?
How can I configure and administrate ODM under SCO OpenServer 6.0.0 for disk mirroring (Raid 1) only?…
- Unable to reset user passwords with HipCheck on OpenServer 6.
Resetting account passwords through HipCheck 1.0.3 fails for accounts on OpenServer6 systems using the HipCheck Unix Agent.…
- Which is the best combination, a SAS controller with SATA HD's or a SAS controller with SAS HD's?
What are the differences between a SAS Controller & SATA HD's or a SAS Controller & SAS HD combinations on my server.…
- How can I change the IRQ and IO Address of a COM port on my already installed OpenServer 6.0.0 system?
I have installed my OpenServer 6.0.0 system and now I want to change the IRQ and/or IO address used by one of the dumb serial ports (COM1/COM2) on my server. How do I do this?…
- IBM has changed the format for naming existing and new Intel based server models. They are now referred as System x. What is the new naming for the next generation of which older xSeries systems?
IBM has changed the format for naming existing and new Intel based server models. They are now referred as System x. The old naming where referred as xSeries.…
- My OpenServer 5.0.x mapkey(M) file does not work on OpenServer 6.0.0
I am upgrading from OpenServer 5 to OpenServer 6 and I have a modified…
- Open Sound System (oss) Driver Supplement - oss Driver version 1.01
The oss Driver version 1.01 provides sound support on the UnixWare 7.1.4 and OpenServer 6.0.0 platforms.…
- Network drivers package update - nd package version 8.0.6e
What NIC drivers are available for for OpenServer 6.0.0, UnixWare 7.1.4, and UnixWare 7.1.3?…
- How can I find out what's the latest hardware/software that is supported/certified for the SCO operating system platform?
How can I find out what's the latest hardware and software that is supported/certified for the SCO operating system platform?…
- I can't print from a SCO Unix box running Samba 3.0.X to a Windows XP shared printer.
I had a SCO UnixWare 7.1.3 server with SAMBA 2.2.8 installed.…
- I get "The CD in the drive is unreadable" error when trying to install OpenServer 6 from CDROM
I am trying to install OpenServer 6.0.0 from CDROM.…
- How can I automate a new user creation with password on the failover UW7 or OSR6 server when adding that new user on the live server?
I have a live and a failover server environment setup.…
- Can I make the OpenServer 6 Console NumLock key behave the way it did on OpenServer 5?
The behaviour of the Console NumLock is not the same on OpenServer 6.0.0 as on OpenServer 5.…
- How can I use my USB Floppy Drive to load additional HBAs at install time on OpenServer 6.0.0
The server I am installing on does not ship with a floppy drive as part of the configuration.…
- What is the MPlayer 1.0 Supplement for OpenServer 6 and where can I download it?
What is the MPlayer 1.0 Supplement for OpenServer 6 and where can I download it from?…
- How to upgrade from SCOoffice 4.1 to SCOoffice 4.2 on single system
If you want to upgrade your current system that is running OpenServer 5.0.7 with SCOoffice 4.1 to OpenServer 6.0 with SCOoffice 4.2 follow the steps below:…
- What fixes have been delivered as part of MergePro Desktop Edition 6.0f?
What fixes have been delivered as part of MergePro Desktop Edition 6.0f?…
- How do I configure a CUPS printer that utilizes a shared Windows or Samba printer that requires user authentication?
How do I configure a CUPS printer that utilizes a shared Windows or Samba printer that requires authentication?…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 5.0.5 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 6.0.0?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing