OpenServer 5.0.7 technical articles
676 articles from the Xinuos database that name OpenServer 5.0.7. Showing 151–200 of 676.
- Configuration of SAS Tape Drives on HP ProLiant Servers Configured with HP Smart Array Serial (SAS) Controllers on SCO OpenServer 5.0.7
How to correctly config SAS Tape Drives on HP ProLiant Servers configured with HP Smart Array Serial (SAS) Controllers on SCO OpenServer 5.0.7…
- I have run patchck but it has not installed all available patches. Why?
I have run patchck but it has not installed all available patches. Why?…
- Cabling requirements for IDE CD/DVD Players and Burners
CD/DVD burners / Players will be recognized at bootup by the server BIOS but will stop and freeze randomly during SCO OS.…
- How many CPUs can SCO OpenServer 5.0.7 support?
SCO OpenServer 5.0.7 can theoretically run on systems with up to 30 CPUs.…
- What is Support Level Supplement (SLS) OSS674, the SCO Symmetrical MultiProcessing Update?
What problem is fixed by Support Level Supplement (SLS) OSS674A, the SCO Symmetrical MultiProcessing Update?…
- Timezone not changed when I logout and log back into my OpenServer system.
I am using the System Time Manager to change the timezone on my server. When I change the timezone in the manager I am told:…
- How can I setup Dynamic Port Forwarding to my SCO Unix Server?
I would like to setup Dynamic Port Forwarding to my SCO Unix server. How can I do this?…
- How to install, configure and launch Merge 5.3.26c?
In this example, we will use v5.3.26c from the UnixWare 7.1.4 Media Kit CD3.…
- How to setup and configure a HP StorageWorks Ultrium LTO-2 448, LTO-3 920 and LTO-4 1760 / 1840 SAS Tape Drive connected to LSI SAS3800X SAS controller on SCO OpenServer 5.0.7 / OpenServer 6.0.0 & UnixWare 7.1.4?
How to setup and configure a HP StorageWorks LTO Ultrium LTO-2 448 SAS Tape Drive connected to LSI SAS3800X SAS controller on SCO OpenServer 5.0.7 / OpenServer 6.0.0 & Unixware 7.1.4?…
- Where can I get pre-created Openserver 5.0.7 Boot CD image that contains commonly used BTLD?
In TA126828, "How can I, during SCO OpenServer 507 installation, load a BTLD via CD-ROM (Not via a floppy drive)?" talks about how to build a OSR 5.0.7 BTLD CD to use for installation.…
- What driver do I need for my HP SCSI, SAS, or Fibre Channel storage controller?
I need to find the correct driver for my HP (Hewlett Packard) SCSI, SAS, or Fibre Channel storage controller, and I need to know where HP recommends I obtain the driver.…
- Where can I obtain the driver for my IBM ServeRAID 8i, 8k, 8k-l, or 8s SAS controller?
The IBM ServeRAID Serial Attached SCSI (SAS) controllers known as the ServeRAID 8i, ServeRAID 8k, ServeRAID 8k-l, and ServeRAID 8s, require an updated version of the Adaptec 'aacraid' driver…
- How can I improve security on my SCO Unix Server?
What steps can be taken to improve security on my SCO Unix server?…
- How can I, during SCO OpenServer 507 installation, load a BTLD via CD-ROM (Not via a floppy drive)?
Is there a way to load an additional BTLD that is not part of the Openserver507 Install CD via CD-ROM during OSr507 installation?…
- How do I update my TimeZone file for the New Zealand DayLight Changes?
How do I make my SCO Unix server comply to the New Zealand Daylight TimeZone changes as highlighted in the following document?…
- OpenServer 5.0.7 detects my disk but does not display its capacity correctly.
While installing or configuring an new disk with OpenServer 5.0.7, the operating system sees the disk but the capacity of the disk that is seen is only a small percentage of the actual size …
- Where can I find which COBOL runtime or compiler are supported under SCO Unix
Where can I find which COBOL runtime or compiler are supported under SCO Unix?…
- How can I get a MultiTech MT5634ZPX-PCI V.92 Internal PCI Modem to work with SCO OpenServer 5.0.7?
How can I get a MultiTech MT5634ZPX-PCI V.92 Internal PCI Modem to work with SCO OpenServer 5.0.7?…
- How do I configure RSA Authentication between two SCO Unix systems?
I would like to use RSA Authentication when logging in from one SCO Unix server to another. How can I do this?…
- How to configure a MultiTech MT5656ZDX V.92 (or MT5656ZDXV) Serial Modem under SCO OpenServer 6.0.0, 5.0.7 & UnixWare 7.1.4?
I have a MultiTech MT5656ZDX V.92 Serial Modem.…
- Which is the best combination, a SAS controller with SATA HD's or a SAS controller with SAS HD's?
What are the differences between a SAS Controller & SATA HD's or a SAS Controller & SAS HD combinations on my server.…
- IBM has changed the format for naming existing and new Intel based server models. They are now referred as System x. What is the new naming for the next generation of which older xSeries systems?
IBM has changed the format for naming existing and new Intel based server models. They are now referred as System x. The old naming where referred as xSeries.…
- How can I find out what's the latest hardware/software that is supported/certified for the SCO operating system platform?
How can I find out what's the latest hardware and software that is supported/certified for the SCO operating system platform?…
- What is Support Level Supplement (SLS) OSS673, the OSR 5.0.7 SCSI Floppy Driver supplement?
What problem is fixed by Support Level Supplement (SLS) OSS673A, the OSR 5.0.7 SCSI Floppy Driver supplement?…
- What are the versions of the driver (SCO or IHV) on the SCO OpenServer 5.0.7 Supplement 5 BTLD?
What are the the versions of the drivers BTLD (SCO or IHV) on the SCO OpenServer 5.0.7 Supplement 5 BTLD:…
- I can't print from a SCO Unix box running Samba 3.0.X to a Windows XP shared printer.
I had a SCO UnixWare 7.1.3 server with SAMBA 2.2.8 installed.…
- What is the UDK Compatibility Module Update version 8.0.2Ca for OpenServer 5.0.7?
What problems are fixed by the UDK Compatibility Module Update UDKcompat_8.0.2Ca?…
- Drivers for the Intel PRO/1000 series Gigabit Ethernet family of network cards - eeG Driver version 3.1.7a
What driver is available for the Intel PRO/1000 and HARDWARE listed below?…
- How to upgrade from SCOoffice 4.1 to SCOoffice 4.2 on single system
If you want to upgrade your current system that is running OpenServer 5.0.7 with SCOoffice 4.1 to OpenServer 6.0 with SCOoffice 4.2 follow the steps below:…
- OSR507:Installation of some HP servers with USB floppy fails
I want to install a HP server (for example DL380G5) using a USB floppy. During initialization I get an error similar to this one:…
- What is Support Level Supplement (SLS) OSS672, the OpenServer 5 Network Header File Update?
What problem is fixed by Support Level Supplement (SLS) OSS672A, the OpenServer 5 Network Header File Update?…
- How do I configure a CUPS printer that utilizes a shared Windows or Samba printer that requires user authentication?
How do I configure a CUPS printer that utilizes a shared Windows or Samba printer that requires authentication?…
- What is wd_v2.0_btld.img, the updated wd driver for SCO OpenServer 5.0.7?
What is wd_v2.0_btld.img, the updated wd driver for SCO OpenServer 5.0.7?…
- Drivers for the Intel PRO/1000 series Gigabit Ethernet family of network cards - eeG Driver version 3.1.7
What driver is available for the Intel PRO/1000 and HARDWARE listed below?…
- Using the default installation settings for bad track scanning causes a significant increase in installation time.
When performing an initial OpenServer 5.0.x installation, the installation software provides the user several options to scan the hard drive(s) for bad tracks. Bad track scanning is used to …
- OpenServer 5.0.7:Late News
Where can I find the OpenServer 5.0.7 Late News?…
- Will SCO UnixWare and OpenServer run on LSI SCSI controllers that have the Integrated RAID on them (Also known as IM "Integrated Mirroring" and IME "Integrated Mirroring Enhanced")?
LSI have in some of their SCSI & SAS Fusion-MPT Technology HBA controllers, a built-in Integrated Raid Technology, also knows as IM and IME.…
- Why should I apply a DST patch to my OpenServer 5 system when a simple update of /etc/TIMEZONE works just as well?
I need to update my system to interpret the new US Energy Policy Act of 2005 rules for Daylight Saving Time (DST).…
- My HP Proliant ML370-G5 sporadically reboots with HP EFS 5.74a for SCO OpenServer 5.0.7 or EFS 7.74a for SCO UnixWare 7.1.4 installed and the ASR in the BIOS enabled.
I have disabled the ASR (advanced Server Recovery) in the BIOS and this has stopped the sporadic reboot, but I get this error message on the console when the OS is booted:…
- Which SCSI SAS (Serial Attached SCSI) Host Bus controllers and SAS RAID controllers are known to have driver support for SCO OpenServer 5.0.7?
Which SCSI SAS (Serial Attached SCSI) Host Bus controllers and SAS RAID controllers are known to have driver support for SCO OpenServer 5.0.7 (BTLD Driver)?…
- How do I determine what Mail Transport Agent (MTA) is running on my server?
How do I determine what Mail Transport Agent (MTA), such as Sendmail, PostFix or MMDF is running on my server?…
- I'm getting an error that says the software manager is already running on my machine and I do not think it is.
I'm getting an error when trying to start custom that states custom is already running or I'm not authorized.…
- OpenServer 5.0.7 does not recognize the full drive capacity on HP logical drives
I am installing OpenServer 5.0.7 on a HP Proliant system with a logical drive array that is >250Gb in size, the OpenServer installation does not recognise the full drive capacity.…
- My SCO OpenServer 5.0.7 installation panics when I followed TA126653 on a Fujitsu Siemens PRIMERGY TX150-S5, using the first FCS cut of the SCO OpenServer 5.0.7 "Base Operating system Installation CD" from 2003 labeled "7OSR0
But I do not have the recommended July 2005 cut of OSR507 CD Media "Base Operating system Installation CD" with label "7OSR01A05073 July05" on it.…
- I cannot install SCO OpenServer 5.0.7 on a Fujitsu Siemens PRIMERGY TX150-S5 that has no standard legacy floppy drive attached to it by default, using a BTLD on a floppy disk via USB floppy drive.
I have a Fujitsu Siemens PRIMERGY TX150-S5 Server that has no standard legacy floppy drive attached to it. Fujitsu Siemens now ship their PRIMERGY TX150-S5 with no legacy floppy drive instal…
- OSR506/507/600/714:/etc/ftpconv not working as detailed
The file /etc/ftpconv details how to handle certain file types extensions:…
- What is soap-1.0.0Bb_vol.tar, the "gSOAP 2.3.3 and JavaSOAP (including Xerces for Java" for OpenServer 5.0.7 product?
What is soap-1.0.0Bb_vol.tar, the "gSOAP 2.3.3 and JavaSOAP (including Xerces for Java)" for OpenServer 5.0.7 product?…
- What logs and debugging technics are available for Hipcheck?
What logs and debugging technics are available for Hipcheck?…
- Where can I find a document explaining the comparison between the SCO OpenServer 5.0.X and 6.0.0 Kernel Tunables?
I want to upgrade from my OpenServer 5.0.X to OpenServer 6.0.0. I am looking for a comparison table between the SCO OpenServer 5.0.X and 6.0.0 kernel tunables. How can I find detailed inform…
- I am trying to disable the L1 cache on my pentium3 or greater CPU and now my machine panics.
After the installation of MP5 on my OpenServer 5.0.7 machine I notice that the cache=/n bootstring causes a panic in mp_picinit.…
Other releases: OpenServer 5.0.6 · OpenServer 5.0.5 · OpenServer 6.0.0 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 5.0.7?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing